• SN74LVC2G17-Q1: Qualification Report

  

  Jim Brinkhurst1

  TI Thinks Resolved

  Part Number: SN74LVC2G17-Q1 Tool/software: Hi experts Where can I get the detailed qualification report for this device? Also specifically, what are the pre-conditioning details/if any? Thanks! Jim B

  • 2 months ago
  • Logic
  • Logic forum
Answered

• SN74LVC2G17: Different Schmitt thresholds than LVC1G17

  

  WST

  Resolved

  Part Number: SN74LVC2G17 Tool/software: When I read the data sheets the LVC1G17 can switch with a rising 3.04V signal with a 5V supply MAX:(2.74+3.33)/2 = 3.035V, so I could send a 3.3V logic signal to the part and have it switch. However, the LVC2G17…

  • Resolved

  • 2 months ago
  • Logic
  • Logic forum
Answered

• SN74LVC2G17: Can I use this device to convert from 3.3V to 5V as a logic level translator?

  

  Eric Norton

  Resolved

  Part Number: SN74LVC2G17 Other Parts Discussed in Thread: SN74LVC2G14 , UCC37324 , SN74HCT14 Tool/software: Hi, I want to use the SN74LVC2G17DBVR to do a logic-level translation from 0-3.3V signals on the inputs and convert them to 0-5V signals on the outputs…

  • Resolved

  • 4 months ago
  • Logic
  • Logic forum
Answered

• SN74LVC2G17: Do we need dampening resistor at the output?

  

  Neet

  Resolved

  Part Number: SN74LVC2G17 Other Parts Discussed in Thread: TMAG5111 , , SN74HCS541 , TSD05 , TXU0102 Tool/software: Hello E2E Community, We are using SN74LVC2G17 to buffer a sensor output from a remote Open drain TMAG5111 sensor with 0-5V range & a maximum…

  • Resolved

  • 5 months ago
  • Logic
  • Logic forum
Answered

• SN74LVC2G17: Correct footprint for DSBGA

  

  Paolo Baesso

  Resolved

  Part Number: SN74LVC2G17 Good morning, I am designing the library component for SN74LVC2G17, and I would like to double check the footprint for YZP package (DSBGA (6) ) The manual shows the pin numbers as 1, 2, 3, 4, 5, 6. The usual convention for DSBGA…

  • Resolved

  • 8 months ago
  • Logic
  • Logic forum
Answered

• SN74LVC2G17: As Management Data Clock buffer

  

  Roy Hsu

  Resolved

  Part Number: SN74LVC2G17 Hi Team, My customer would like to use SN74LVC2G17 as Management Data Clock(MDC) buffer, and MDC frequency is 7.8MHz, will it have any concern? And is SN74LVC2G17 have recommended operating frequency? Thanks. Best Regards, Roy

  • Resolved

  • 8 months ago
  • Logic
  • Logic forum
Answered

• SN74LVC2G17-Q1: Spice model with both channels?

  

  Zach Kimble

  Resolved

  Part Number: SN74LVC2G17-Q1 Hello, I downloaded the spice model for SN74LVC2G17-Q1 from TI.com but the model only seems to have a single channel even though the device has two channels. Is there a model that has two channels or should I use two of this…

  • Resolved

  • 9 months ago
  • Logic
  • Logic forum

• SN74LVC2G17: Questions of SN74LVC2G17

  

  Jimmy Lai

  TI Thinks Resolved

  Part Number: SN74LVC2G17 Other Parts Discussed in Thread: TXU0102 , LSF0102 Dear Team, Could you help to double check the schematic as below? Many Thanks, Jimmy

  • over 1 year ago
  • Logic
  • Logic forum
Answered

• SN74LVC2G17-Q1: Input/output current in datasheet per channel or total?

  

  Zach Kimble

  Resolved

  Part Number: SN74LVC2G17-Q1 Hello, I just want to confirm, for SN74LVC2G17-Q1, the 32mA maximum input/output current is per channel, correct? It is not the total of all channels combined? Thank you! Best regards, Zach Kimble

  • Resolved

  • 9 months ago
  • Logic
  • Logic forum

• SN74LVC2G17: If powering the SN74LVC2G17 from 5.0V, can a 3.3V logic signal reliably work?

  

  Erik Knechtel

  TI Thinks Resolved

  Part Number: SN74LVC2G17 Other Parts Discussed in Thread: TXU0102 , TLV7012 I am looking for a Schmitt trigger buffer device with 2 channels which can handle 3.3V logic inputs and give 5V logic outputs with no error. According to the datasheet for the…

  • over 1 year ago
  • Logic
  • Logic forum

Didn't find what you are looking for? Post a new question.