Hi Renan,
Here are the values:
Result- Theta JA-High K (standard datasheet value)
201.5
Result-Theta JC, top (standard datasheet value)
91.9
Result-Theta JB (standard datasheet value)
122.6
Result- Psi JT (standard datasheet value)
31.8
Result…
Hi Art,
The request took longer than expected. See below for those values.
Result- Theta JA-High K (standard datasheet value)
222.7
Result-Theta JC, top (standard datasheet value)
79.9
Result-Theta JB (standard datasheet value)
132.6
Result-…
Part Number: SN74LVC2G32 Full part number is SN74LVC2G32DCUR. We're using this part, however some times need to solder this part by hand/manual. would you please help recommend the hand/manual soldering temperature and during time as well. thank you…
Part Number: SN74LVC2G32-Q1 Hi all,
Can you tell me if the FIT rate shown in the thread below (0.5 FIT or 0.5 failure per 10^9 hours per device) is applicable to SN74LVC2G32-Q1? https://e2e.ti.com/support/logic/f/logic-forum/803625/sn74lvc1g38-fit-rate…
Part Number: SN74LVC2G32-Q1 Hi TI expert
I looked the datasheet and it was unmarked ADAS information,please tell me whether SN74LVC2G32QDCURQ1 can be used in ADAS application and ADAS products (QM/A/B/C/D) is QM?
Thanks
Jacob
Part Number: SN74LVC2G32 Hello,
My customer is considering to replace TOSHIBA TC7W32FU with SN74LVC2G32.
TC7W32FU specifies VOH min as 4.13V with -4mA, VCC=4.5V and Ta=-45-85C. On the other hand, SN74LVC2G32 specifies VOH min as 3.8V with -32mA, VCC=4…
Part Number: SN74LVC2G32 Hi E2E,
Good day!
May I know what is the correct pinout for the YZP package of SN74LVC2G32. The pinout on page 3 is not in BGA pin numbering so it is quite confusing. Also, after checking the ultralibrarian file, the pinout is…
Hello Malcolm-san,
I got their reply which states their system requires and show those in the attached. Would you please check the attached and give me your comments and input your suggestion if you have?
CD4027B_Alternatives_2024July12.pptx
Best Regards…