Part Number: SN74LVC3G07-Q1 Hello, I accidentally used a downloaded footprint which resulted in the Input and Output for SN74LVC3G07-Q1 to be flipped. I am hoping that someone can please help me find a similar package offering that has the input and output…
There is a 100 mA limit for the entire chip.
You need to use LVC or LXC devices, and they must be small enough that you do not exceed the 100 mA limit. Use the SN74LVC3G07 when switching to ground, or SN74LVC2T45/SN74LXC1T14 when switching to VCC.
Part Number: SN74LVC3G07-Q1 Other Parts Discussed in Thread: SN74LVC2G17-Q1 , SN74LV125A-Q1 , SN74LVC3G07 , SN74LVC3G34 Hello,
Will the output of this device be 0V when the Vcc is 0V while the input is set to 3.3V?
I saw that the device's input is rated for…
Part Number: SN74LVC3G07 Other Parts Discussed in Thread: SN74LVC3G17 , SN74LVC3G34 Hi Sir,
I plan to cascade 2 pcs of SN74LVC3G07 for 20 inches routing in SPI interface, is it OK? and how to placement these 2 pcs buffer, please advice.
And what does it…
Part Number: SN74LVC3G07 Hello,
I the datasheet there is a Function Table which mentions :
INPUT OUTPUT A | Y
===============
H | H |
L | L |
But the output should be Open DraIN - MEANING high-z.
PLEASE ADVICE ME ABOUT THIS , IS THE…
Part Number: SN74LVC3G07 Please provide typical input current data vs temperature (a graph / histogram would be ideal) for the following datasheet parameters:
Ii (I-in) - spec'd at +/-5uA
Icc - spec'd at +/- 10uA
Delta Icc - spec'd at 500uA…
Part Number: SN74LVC3G07-EP DWG V62/09610 FIGURE 4 LOGIC DIAGRAM APPEARS TO BE INCORRECT. IT SHOWS INVERTING LOGIC, BUT THIS PART (ACCORDING TO FIGURE 3 TRUTH TABLE IN THIS DRAWING AND TI SN74LVC3G07-EP) IS NON-INVERTING. A CORRECTED COPY SHOULD BE CREATED…
Part Number: SN74LVC3G07 Hi,
I would like to know some details regarding SN74LVC3G07 (Triple Buffer/Driver with Open Drain Outputs).
1. The datasheet stated this device is specified for partial-power-down. If Vcc is GND, the output is disable. The disable…