Part Number: SN74LXC1T45 Hi,
What's the input and output impedance of this level translator?
How would I go about matching this translator to (say) a 50-ohm trace. Are there any guidelines on what kind of termination to use on the inputs and outputs…
Part Number: SN74LXC1T45-Q1 Hi,
Can you explain what this table means from the datasheet?
My understanding is that for the DIR pin, VT+ gives the voltage range of a logic high (A to B) and VT- gives the voltage range of a logic low (B to A). But what…
Part Number: SN74LXC1T45-Q1 Other Parts Discussed in Thread: AVCLVCDIRCNTRL-EVM , Hi,
In my current design I have a 3.3V source connected to VCCA and a voltage divider network connected to A that's roughly 3.3V. What is the pull down resistance on pin…
Part Number: SN74LXC1T45
Hi Team,
the datasheet of SN74LXC1T45 says there is a DRL package available, but on the web page it is missing and can't be ordered.
will there be SN74LXC1T45DRL available?
Best Regards,
D.
Part Number: SN74LXCH1T45 Other Parts Discussed in Thread: SN74LXC1T45 Hi Team,
what is the difference between SN74LXCH1T45 vs SN74LXC1T45?
Best Regards,
D.
If the goal is to do level shifting, an actual level shifter (e.g., TXU0101, SN74LXC1T45) with a push/pull output would allow such speeds.
But if you really need a fast open-drain output, you could add a strong open-drain buffer after the comparator.…
The rise time violates the Δt/Δv limit. I do not know whether this is the cause of the problem, but you are certainly running the device outside its recommended operating conditions, and you are likely to get oscillations at the output. Use the SN74LXC1T45…