Part Number: SN75DPHY440SS Hi team,
Our customer is considering the adoption of the SN75DPHY440SSRHRR. During hardware evaluation, we found that the trace length on the input side is approximately 50 cm, and the design failed the compliance test.…
Part Number: SN75DPHY440SS Hello,
We measured the temperature approximately 0.5 cm above the component SN75DPHY440SSRHRR, and the measured temperature was 72.9 °C.
According to the datasheet, the Operating free-air temperature for SN75DPHY440SS is…
Part Number: SN75DPHY440SS The N65DPHY440 SS mipi enhanced chip requires some technical support:
1.Are there any relevant materials regarding the upper limit and configuration requirements of the input/output link length?
2. Could you provide the…
Part Number: SN75DPHY440SS Tool/software: Hi, I have question about pre-emphasis function of SN75DPHY440SS. Here is our configuration. We measured input signal of DSI and output signal of DSI as differenatial signal. We set "PRE_CFG1" as 2.5dB and "VSADJ_CFG0…
Part Number: SN75DPHY440SS Hi Team,
Thanks for your support in https://e2e.ti.com/support/interface-group/interface---internal/f/interface---internal-forum/1563890/sn75dphy440ss-solution-and-sch-review/6045986
Customer has a further questions that…
Part Number: SN75DPHY440SS Tool/software: Hi, TI expert
The customer used SN75DPHY440SS while using MIPI output camera in the existing project.
However, during the development of a new project, the camera was changed to omnivision analog type instead…
Part Number: SN75DPHY440SS Tool/software: SN75DPHY440SS Sparameter （dphy100rx.s10p、dphy100tx.s10p）
Please tell me how to use it. I don't know which pin it is.
