Part Number: SN75LVCP600S Hi Experts, Can you please help us by provide Maximum Operating Temperature value for the part SN75LVCP600SDSKT? Kind regards, Gerald
Part Number: SN75LVCP600S Other Parts Discussed in Thread: DS64BR111 Hi,
I am using SN75LVCP600S SATA redriver . Now I will be doing SI analysis for my board using this driver. My requirement is SATA 3.0. So what should be the value of return loss for…
Part Number: SN75LVCP600S Other Parts Discussed in Thread: SN75LVCP600 Hello,
I've using the SN75LVCP600S for a SATA3 application. There are separate SN75LVCP600S chips on the TX and RX lines as shown below.
We've noticed at times the OS (Win10x64 Pro…
Part Number: SN75LVCP600S Hello Team,
My customer is looking for the Maximum Junction Temperature of SN75LVCP600SDSKT, can you share this information with us?
Regards,
Renan
Part Number: SN75LVCP600 Other Parts Discussed in Thread: SN75LVCP601 , Hello.
We are currently using SN75LVCP600 SN75LVCP601 and we have a problem with speed during use.
I'm testing using Linux.
At first boot, the recognition was recognized as SATA3…
Part Number: SN75LVCP600 Other Parts Discussed in Thread: SN75LVCP601 Hello,
the datasheet states that SN75LVCP600 to be placed close to the RX device.
How far can it be placed? I want to use a SATA cable after the SN75LVCP600 device to the SSD, how long…
Part Number: SN75LVCP600 Other Parts Discussed in Thread: SN75LVCP601 Hi Team,
my customer is using SN75LVCP600 for solution and asking for SI model for simulation,
do we have the simulation model to provide?
Andy
Part Number: SN75LVCP600S Other Parts Discussed in Thread: SN75LVPE801 , SN75LVPE802 Hi sir,
I am in need of redriver that supports input equalization and out preemphasis. And supports SATA 3.0 6Gbps.
Is there any recommended product for this application…
Part Number: SN75LVCP600S Other Parts Discussed in Thread: SN75LVCP601 Hi,
We are using P/N SN75LVCP600S in our design. Could I please request IBIS AMI MODEL.
Our trace length is 8in on Meg4 material from IC to SATA Connector. Would like to simulate if…