Part Number: TCA39416 I am reading the datasheet for VCCA and VCCB requirement.
One area says 0.72 V to 1.98 V on both A and B ports; VCCA ≤ VCCB
In another area says It is operational from 0.72 V to 1.98 V on both the A-side and B-side with VCCA must…
Part Number: TCA39416 Hi Team
Could you please provide the package outline dimensions of PTCA39416DTWR?
I searched for datasheets and web pages but couldn't find anything.
I’m sorry for your inconvenience.
Best regards
Hi William,
Sorry for the delay.
TCA39416 is basically the same device as TCA39306 but with active circuitry such as the rise-time and fall-time accelerators that would help with driving the rising and falling edges in IxC.
The 20'' wire equates to roughly…
Hi Neet,
TCA980x does not have an RTA. The internal current source (ICS) acts like a pull-up resistor rather than an RTA, and the ICS is used for direction control.
Consider our hot-swap buffers such as the TCA4307 or TCA9511A which incorporate rise-time…
Part Number: LSF0108 Other Parts Discussed in Thread: TXB0108 , TXU0304 , TXU0104 , TXU0204 , TXS0108E Good day,
Is it allowable to combine the level shifters LSF0108 and TXB0108 as shown in 2 attached pictures?
Pict.1 - 0.65V <-> 1.8V translation …
Hey Jim,
At the moment, there is the TCA39416 and the TCA39306 that supports voltage translation in I3C applications.
Also see [FAQ] What Analog Switch / Multiplexer should I use for I3C applications? for more information.
Regards,
Jack
Part Number: LSF0102 Other Parts Discussed in Thread: TCA39416 , TCA9803 , TCA39306 , PCA9306 ,
Hi, Support Team
below picture is our project I2C/I3C DDR EEPROM diagram.
LSF can be used for I2C open-drain mode and I3C push-pull mode?
if any suggestion, Please…
Other Parts Discussed in Thread: TCA9517 , TCA39416 , LSF0102 Hi,
I would like to find a I2C bus voltage-level translator and the brief specification as below,
Please help to suggest the solution, Thanks!
VL : 3.3V
VCC : 0.9V or less.
Package : SOIC-8.
…