• TCAN1042HV-Q1: SAE J2284-4, ISO 11898-2 and SAE J1939-17

  

  Darren Jenkins

  TI Thinks Resolved

  Part Number: TCAN1042HV-Q1 Other Parts Discussed in Thread: TCAN1051 CAN team, I have an automotive customer asking if TCAN1051HDRQ1 and TCAN1042HVDRQ1 meet the following standards. Can you let me know please? SAE J2284-4, ISO 11898-2 and SAE J1939-17…

  • 6 days ago
  • Interface
  • Interface forum

• TCAN1042HV: TCAN1051HV-Q1

  

  Sagar Vadisherla

  TI Thinks Resolved

  Part Number: TCAN1042HV Hi, Please find attachment PDF for CAN schematic, please review and let us know if any changes need to be done Thanks Sagar CAN.pdf

  • over 1 year ago
  • Interface
  • Interface forum

• TCAN1042HV-Q1: TCAN1042HV-Q1 replace TJA1042T/3

  

  LeoChen

  Part Number: TCAN1042HV-Q1 Dears, I noted TCAN1042HV-Q1 could be used to P2P replace TJA1042T/3. I wanna to know except P2P in hardware, if my software need to have some change?

  • over 1 year ago
  • Interface
  • Interface forum

• TCAN1042HV-Q1: CAN Transceiver Termination and CMC Details

  

  Suhan Shetty

  TI Thinks Resolved

  Part Number: TCAN1042HV-Q1 Dear TI Team, We are using TCAN1042HVDRQ1 CAN Transceiver in our Design. We are facing some issue in RE test(Failure Frequency 200Mhz to 230 Mhz and 380Mhz to 420Mhz). I have attached the schematic view of our CAN Transceiver…

  • over 1 year ago
  • Interface
  • Interface forum

• TCAN1042HV-Q1: Pin drop replacement for TCAN1051HV-Q1 ?

  

  REDDY Y

  TI Thinks Resolved

  Part Number: TCAN1042HV-Q1 Other Parts Discussed in Thread: TCAN1051HV-Q1 , , TCAN1051 At present i am using TCAN1051HV-Q1 in my design as CAN interface. We have a plan to develop alternate for ease of procurement. i checked all the parameters with TCAN1042HV…

  • over 1 year ago
  • Interface
  • Interface forum
Answered

• TCAN1042HV-Q1: Thermal PAD connection to GND?

  

  Antonio Faggio

  Resolved

  Part Number: TCAN1042HV-Q1 Hi All, Regarding the TCAN1042HV-Q1 customer chose the VSON8 package. I realized that this package also has the thermal PAD which, as the datasheet suggests, must be soldered on the PCB in order to guarantee the correct thermal…

  • Resolved

  • over 2 years ago
  • Interface
  • Interface forum

• RE: TCAN1042HGV-Q1: Does it support SAE J1939 standard?

  

  Eric Schott1

  Hi Chase, The SAE standards seem primarily focused on system level capability and would not be uniquely dependant on the transceiver. CAN transceivers are typically rated to conform to the ISO 11898-2 physical layer CAN standard which may be referenced…

  • 5 days ago
  • Interface
  • Interface forum

• TCAN1042-Q1: Industrial grade P2P replacements

  

  Jiandong Liu

  TI Thinks Resolved

  Part Number: TCAN1042-Q1 Other Parts Discussed in Thread: TCAN1042HG , TCAN1042H , TCAN1042HV , TCAN1042HGV , TCAN1044A-Q1 Hi expert, Do you any industrial P2P replacement of TCAN1042-Q1? Thanks. Regards, Jared.

  • 6 months ago
  • Interface
  • Interface forum

• TCAN1042HV-Q1: In idle mode, the output waveform of TCAN1042 will be deformed,

  

  garin zhu

  TI Thinks Resolved

  Part Number: TCAN1042HV-Q1 TCAN1042 encountered problems in use: in idle mode, the output waveform of TCAN1042 will be deformed, and NXP can receive data normally, resulting in customers using TCAN1042 products need to modify the program; affect the follow…

  • over 4 years ago
  • Interface
  • Interface forum

• TCAN1042H-Q1: IC failure during short to battery test with 60V on CANH line

  

  Mahendra Patel1

  Part Number: TCAN1042H-Q1 Other Parts Discussed in Thread: TCAN1042HV-Q1 Hello Team, One of my customer tested, short to battery (+60V) for the CAN bus line within the rating given in data sheet for TCAN1042HV-Q1 Actions and Observations: We connected…

  • over 2 years ago
  • Interface
  • Interface forum

Didn't find what you are looking for? Post a new question.