Because of the Thanksgiving holiday in the U.S., TI E2E™ design support forum responses may be delayed from November 25 through December 2. Thank you for your patience.
Part Number: TCAN1043G-Q1 Hello,
My name is Simeon Aleksandrov, I am an FAE intern at TI BeNeLux.
It seems there is a mismatch in the dimensions of the TCAN1043GDRQ1 datasheet. Looking at the first page of the datasheet, the dimensions are 8.95mm x 3…
Part Number: TCAN1043G-Q1 Other Parts Discussed in Thread: TCAN1043 Hi, Team；
Can you help to check and advise what's TXD pin signal frequency requirement in 500Kbps data rate?
Thanks
Part Number: TCAN1043G-Q1 Other Parts Discussed in Thread: TCAN1043 Hi sir,
My customer is connecting TCAN1043G-Q1 nFAULT pin to MCU, may I know how should customer use this pin in their application?
We are also planning to test the functionality of this…
Part Number: TCAN1043G-Q1 Other Parts Discussed in Thread: TCAN1043 Hi TI FAE,
Could you help explain the "nFAULT" behavior.
We have do short experience on CAN bus(short to GND). If CAN is just transmitting, nFAULT will pull low.
If we reset…
Part Number: TCAN1145-Q1 Other Parts Discussed in Thread: TCAN1043-Q1 , TCAN1043G-Q1 Dear whom it concerns,
Appreciate for your support.
I would your CAN product facilities.
My understand is as below table.
Please confirm whether below table is correct…
Part Number: TCAN1043G-Q1 Hi,
Is it recommended to test the differential capacitance according to ISO 11898-2 chapter 6.6 "Input Capacitances"?
I am asking this question because in our HW validation tests we used this method on TCAN1043g - q1…
Part Number: TCAN1043G-Q1 Other Parts Discussed in Thread: TCAN1043 Hi TI partner:
We have a problem need your help.
We have a 1043 with nFAULT = L, RX = L, TX = H status. But it is not like the three problems described by datasheet (TXDDTO/TXDRXD/TSD…
Part Number: TCAN1043G-Q1 Hi Sir,
My customer is using TCAN1043GDRQ1, could you help to advise the recommended common mode choke part number?
Thank you.
Part Number: TCAN1043-Q1 Other Parts Discussed in Thread: TCAN1043 , TCAN1043G-Q1 , Tool/software: Hi team,
For what Baud rate does TCAN1043 transceiver supports?
Thanks,
Leethika
Part Number: TCAN1043G-Q1 Other Parts Discussed in Thread: TCAN1043 Hi
For TCAN1043G, we checked the impedance is 60 ohm on the BUS.
But we found the voltage between CANH and CANL is around 10V.
Is it normal? what should be the right voltage between CANH…
