Hi Gareth,
There are many transceiver factors that impact ringing, most of which are bus driver characteristics. These include paracitics such as capacitance as well as driver behavior such as ringing suppression technique, timing, and drive strength…
Part Number: TCAN1051HGV Hi Experts,
We have used TCAN1051HGVDR Fault Protected CAN Transceiver with CAN FD in our design.
We need to do DVT testing of the same to validate Bus Fault protection.
Test setup as below:
Connecting External power supply between…
Part Number: TCAN1051HGV I have supplied Vcc (Pin3) - 5V and VIO (Pin 5) - 3.3V. I am expecting a 3.3V level on RXD pin but receiving 5V which is causing my 3.3V microcontroller to sink more current.
Alternatively I have replaced TCAN1051HGV/ TCAN1051HVD…
Part Number: TCAN1051HGV Other Parts Discussed in Thread: TCAN1057A-Q1 , TCAN1051 Hi sir,
This is Bhuvaneswari from Zettaone Technology,
I need to know few details for the part TCAN1051HGVDR
Parts are currently active in the website, may i know how long…
Part Number: TCAN1051HGV Team,
Is it possible to disable the TCAN1051HGV by removing V CC and keeping V IO powered? In this state voltage might still be applied to CANH and CANL. I don't see any limitation listed in the abs max ratings section of the datasheet…
Part Number: TCAN1051HGV Hi
We are using the TCAN1051HGV in product and want to add an external TVS on the CAN-L/H data lines as suggested as an optional additional protection in the datasheet.
The datasheet lists the following absolute maximum ratings…
Part Number: TCAN1051HGV Other Parts Discussed in Thread: TCAN1051HV Hi Team,
I had a few questions regarding the TCAN1051HV or TCAN1051HGV.
What is the slew rate of the output?
Are any special measures needed in order to meet emissions and immunity…
Part Number: TCAN1051HGV Hello,
My customer would like to use TCAN10xx Controller Area Network (CAN) Evaluation Module: http://www.ti.com/tool/tcan1042devm#buy to test TCAN1051HGVDR.
Is it something feasible? Because in the product folder I see this…
Part Number: TCAN1051HGV-Q1 Other Parts Discussed in Thread: TCAN1051HGV Hi,
I need to interface this CAN bus transceiver with an FPGA that uses a standard LVTTL 3.3V logic. I read that components with the "V" suffix have a voltage shifter.
Can…
Part Number: TCAN1051HGV-Q1 Other Parts Discussed in Thread: TCAN1051 Hi ,
I amd wondering if our device TCAN1051 support also the shield mode. It is not really describe in the datasheet :
" The proposed CAN FD Shield transceiver provides three operation…