Because of the Thanksgiving holiday in the U.S., TI E2E™ design support forum responses may be delayed from November 25 through December 2. Thank you for your patience.
Part Number: TCAN1144-Q1 Tool/software: Dear Interface Experts,
my customer sends the SPI command to change the TCAN1144 from Normal Mode to Standby Mode by updating MODE_SEL to Standby.
However, the current of the TCAN1144 is still higher than expected…
Part Number: TCAN1144-Q1 Tool/software: I have a question regarding the tcan1144-Q1 which I it is a bit strange to me.
Is the internal watchdog really disable after power on sequence? This is what I read but I am not sure because for us that means that…
Part Number: TCAN1144-Q1 Hi team,
For TCAN1144-Q1 SCK, is there any duty requirement?
Or there is no requirement, should only fulfill following requirement?
tSPI>250ns、tSCKH >125ns、Tsckl>125ns(normal,standby)
tSPI>100us、tSCKH >500ns、Tsckl>500ns…
Part Number: TCAN1144-Q1 Sleep mode cannot enter standby mode while testing TCAN114X-Q1. The yellow portion of the picture confirms that it is indeed 1
The power-up sequence is VSUO 14V VIO 5V wake through 1K resistor to ground, other registers are temporarily…
Part Number: TCAN1144-Q1 Other Parts Discussed in Thread: TCAN1145EVM Hello,
I have been testing the TCAN1144 and prototyping implementing it into some existing hardware.
The bus fault detection functionality it being tested via a custom spidev program…
Part Number: TCAN1144-Q1 Hello,
Can the tMODE_NOM_SLP and tINH_NOM_SLP be applicable for a trasition from Standby to Sleep as well as for Normal to Sleep? Thank you.
Regards,
Oguri (TIJ automotive FAE)
Part Number: TCAN1144-Q1 Other Parts Discussed in Thread: TCAN1146-Q1 , TCAN1145-Q1 , Hello team,
I got to know TCAN1144-Q1, TCAN1145-Q1, TCAN1146-Q1 are the CAN Transceivers used for Partial Networking with SPI interface. Could you please tell is there…
Part Number: TCAN1144-Q1 Is there a CAN conformance of the CAN transceiver TCAN1144-Q1 available from C&S group GmbH (in Wolfenbuettel) and from FTZ (university) Zwickau (EMC conformance)?
Part Number: TCAN1144-Q1 Other Parts Discussed in Thread: TCAN4550-Q1 , TCAN1046A-Q1 Hi team,
As title. my customer is asking two channel SPI interface CAN FD solution, do we have?
Thanks
Part Number: TCAN1144-Q1 Customer was evaluating TCAN1144-Q1 in their new traction inverter design. They would like to check when selling their products to different end customers, who might support CAN or CAN-FD, could TCAN1144-Q1 support the normal communication…
