Part Number: TCAN1462-Q1 Hi experts,
I learned that CAN SIC can reduce the ringing from domination to recessive. Reduce loop delay. But I found that there is not much difference compared with the traditional CAN FD. Which application scenarios should…
Part Number: TCAN1462-Q1 Tool/software: Hi TI CAN Expert,
I am currently testing below topology using TCAN1462-Q1.
For master talk to slaves, or salves talks to master, CANH/CANL waveform looks OK.
However, if you look at slave talks to…
Part Number: TCAN1462-Q1 Tool/software: To whom it may concern -
In the datasheet, it states the following in section 8.3.7 Unpowered Device.
"The TCAN1462-Q1 is designed to be an ideal passive or no load to the CAN bus if the device is unpowered…
Part Number: TCAN1462-Q1 Hi TI Team,
I am currently designing a new system in which we use CAN-FD to communicate between system components. The bus is strictly for internal use and does not need to interface with external or third-party CAN devices…
Part Number: TCAN1462-Q1 Hello,
is my understanding correct, that during "power down" (=VCC or VIO is below the threshold) on the bus only the leakage current I_LKG(IOFF) "appears"?
Is my understanding correct, that in "standby" (=VCC and VIO available…
Part Number: TCAN1462-Q1 Other Parts Discussed in Thread: SN65HVD1050-Q1 , , ESD2CAN24 Tool/software: Hi team,
Our customer performed ESD test on they designed board in case of using TCAN1462-Q1 and using SN65HVD1050-Q1. In the results, when using…
Part Number: TCAN1462-Q1 Hi team,
TCAN1462 can follow the 4 requirements?
Transmission rates and . Frame format
1) the communication speed in the arbitration area should be 500 kbps +/- 0.3%. 2) the communication speed of the data area must…
Part Number: TCAN1462-Q1 Other Parts Discussed in Thread: TCAN1044A-Q1 , Tool/software: Hi team
The average power dissipation of TCAN1462-Q1 is lower than the one of TCAN1044A-Q1.Almost a half.
What does cause the difference? The active Recessive…
Part Number: TCAN1462-Q1 Tool/software: What kind of common mode noise rejection can the differential input receiver provide? Is there test data for frequency ranges from 2MHz to 40GHz?
