Part Number: TCAN1462-Q1 Hi TI Team,
I am currently designing a new system in which we use CAN-FD to communicate between system components. The bus is strictly for internal use and does not need to interface with external or third-party CAN devices…
Part Number: TCAN1462-Q1 Hi Team,
Good Day!!!
We are currently evaluating CAN FD transceivers for our design and are looking for devices that comply with the following standards
SAE J1939-14
SAE J1939-15
SAE J1939-17
ISO 11898-2:2024…
Part Number: TCAN1462-Q1 Other Parts Discussed in Thread: SN65HVD1050-Q1 , , ESD2CAN24 Tool/software: Hi team,
Our customer performed ESD test on they designed board in case of using TCAN1462-Q1 and using SN65HVD1050-Q1. In the results, when using…
Part Number: TCAN1462-Q1 Other Parts Discussed in Thread: TCAN844-Q1 , TCAN1472-Q1 , TCAN1042G-Q1 Hi team,
The MW band (0.53 to 1.8 MHz) is violated in the conduction current test. Measurement conditions: CISPR25 Ed.4 Measurement point: Can single wire…
Part Number: TCAN1462-Q1 Hello,
is my understanding correct, that during "power down" (=VCC or VIO is below the threshold) on the bus only the leakage current I_LKG(IOFF) "appears"?
Is my understanding correct, that in "standby" (=VCC and VIO available…
Part Number: TCAN1462-Q1 Hi team,
TCAN1462 can follow the 4 requirements?
Transmission rates and . Frame format
1) the communication speed in the arbitration area should be 500 kbps +/- 0.3%. 2) the communication speed of the data area must…
Part Number: TCAN1462-Q1 Other Parts Discussed in Thread: TCAN1044A-Q1 , Tool/software: Hi team
The average power dissipation of TCAN1462-Q1 is lower than the one of TCAN1044A-Q1.Almost a half.
What does cause the difference? The active Recessive…
Part Number: TCAN1462-Q1 Tool/software: What kind of common mode noise rejection can the differential input receiver provide? Is there test data for frequency ranges from 2MHz to 40GHz?
Part Number: TCAN1462-Q1 Hello team,
can you please let me know what happens, if the VIO voltage is below its UV_IO (undervoltage detection), but at least one of the signal inputs (TXD, STB) or signal outputs (RXD) is above VIO?
Are there any currents…
