Search tips
Showing 59 results View by: Thread Post Sort by
    Answered

  • TCAN332: Using TCAN332 for I2C

    Resolved
    Part Number: TCAN332 Other Parts Discussed in Thread: P82B96 Using TCAN332, I2C Interface was configured as shown in the picture. However, the I2C Host Adapter only has one SDA and one SCL pin. Is there any solution? I need to receive data or ack from…
    • Resolved

  • RE: TCAN332: Inconsistent Noise on CAN Bus

    I found the source of the noise to be an on-board power supply injecting lots of noise on the bus. When removing this rail, the supply is quite clean. Now that the waveform is a lot cleaner, I am seeing the reference voltage slightly change during communication…
    • Answered

  • TCAN332: CAN BUS dropped packets troubleshooting

    Resolved
    Part Number: TCAN332 Tool/software: I am trying to diagnose and resolve some frequent dropped packets on our CAN BUS. I have designed the hardware while our software engineer has designed the firmware. All our modules utilise the TCAN334DR CAN transceiver…
    • Resolved

  • RE: TCAN332: On bootup CAN high and low lines act as if transmitting

    Hi Daniel, Have you modified the Vcc supply rail to be compatible with the TCAN332? This transceiver expects a 3.3V input to pin 3 of the IC whereas TCAN1042 uses 5V, which is what the IWRL6432BOOST board supplies to the transceiver IC. The internal pull…
    • Answered

  • TCAN332: Thermal data of TCAN332DCN

    Resolved
    Part Number: TCAN332 For the thermal analysis, we need the below data of TCAN332DCN part. Could you please help on this? Required Data: θjb & θjc Maximum power dissipation/Loss at 1Mbps communication? Typical power dissipation/Loss at…
    • Resolved

  • TCAN332: marking

    TI Thinks Resolved
    Part Number: TCAN332 Hi, I would like to know TCAN332DR marking as below is normal? My customer feedback previous marking as below. I've check datasheet but it only show "TC332", or both two marking are fine? I asked CSC support but it feedback…

  • TCAN332: P2P Alternate- Next Gen

    TI Thinks Resolved
    Part Number: TCAN332 Hi All, Do we have any p2p alternate next generation to TCAN332DCNT ? Regards, Saurabh kapoor
    • Answered

  • TCAN332: In our application, the CAN bus will have both 5V CAN and 3.3V CAN transceiver, any suggestion for the output circuit for the environment ?

    Resolved
    Part Number: TCAN332 Hi In our application, the CAN bus will have both 5V CAN and 3.3V CAN transceiver, any suggestion for the TCAN332 output circuit to make it work more robust for this condition? we are reference to this post https://e2e.ti.com/support…
    • Resolved
    • Answered

  • TCAN332: Un-intended GND path through CAN H/L pins

    Resolved
    Part Number: TCAN332 Other Parts Discussed in Thread: BQ76940 Hello Everyone! I am from Delhi, India and we work on low-power e-scooters. We are using TCAN332 CAN transceivers on all the nodes in our e-scooters. We have a BMS (High side switching, in…
    • Resolved
    • Answered

  • TCAN332: vs SN65HVD234

    Resolved
    Part Number: TCAN332 Other Parts Discussed in Thread: SN65HVD234 Hi Team, my customer want to use the TCAN332 instead of SN65HVD234. The do not use Pin 5 (Enable) andPin 8 (Slope control). The Baudrate is 250kBit. Are there significant differences that…
    • Resolved

Didn't find what you are looking for? Post a new question.