Search tips
Showing 18 results View by: Thread Post Sort by
    Answered

  • TCAN334G: TCAN334G IBIS Model

    Resolved
    Part Number: TCAN334G Do you have IBIS models for the TCAN334G? I'd like both the CAN bus and RX/TX pins, if possible.
    • Resolved
    • Answered

  • TCAN334G: CAN tranciever standby mode pulling bus low

    Resolved
    Part Number: TCAN334G Other Parts Discussed in Thread: TCAN334 , TCAN3404 Hi, we have developed an automotive device that uses the TCAN334 or the TCAN3404 (alternate device). This device when not in use needs to be in a low power mode and in this case…
    • Resolved

  • TCAN334G: CAN bus related issues

    TI Thinks Resolved
    Part Number: TCAN334G Other Parts Discussed in Thread: TCAN1462-Q1 Tool/software: Hello, CAN communication requirements: 1. The length of single packet communication data on the CAN bus reaches 64 bytes. 2. The CAN communication rate is 20kbps (adjustable…

  • TCAN334G: 5 Mbps communication failed

    Part Number: TCAN334G Tool/software: Hello. This is seungwook han in korea. now, We are using 3 TCAN334G with MCU and did CAN data rates test. we successed 1~4 Mbps test, but we failed 5Mbps test. because we are using 3 TACN334G, we tested loop…

  • TCAN334G: standby & shutdown preference

    TI Thinks Resolved
    Part Number: TCAN334G Other Parts Discussed in Thread: TCAN334 I want to use TCAN334G with standby & shutdown mode. I have a question about standby & shutdown preference After TCAN334 was standby mode(8pin is high), SHDN is high(5pin is high) => TCAN…
    • Answered

  • TCAN334G: AEC-Q100

    Resolved
    Part Number: TCAN334G Other Parts Discussed in Thread: TCAN334 To whom it may concern. I'm a hardware enginner and we need AEC-Q100 & 3.3V & Low standby current(under 100uA) & CAN FD IC. So, we are considering TCAN334G. I want to know plan of TCAN334G…
    • Resolved

  • TCAN334G: The suggested/maximum length of cable for 5Mbps or higher bit rate(8Mbps)

    Part Number: TCAN334G Hi Ti experts, My customer wants to use F280039C + TCAN334G to achieve 5Mbps CAN-FD function. What is the suggested/maximum length of cable for 5Mbps or higher bit rate(8Mbps). As shows in TCAN334G's datasheet, it is 40m…

  • RE: TCAN334G: TCAN334G - Intermittent Function between subsequent MCU Flashes and Power Cycles

    Thank you very much for all of this information. Just out of curiosity, why the switch to TCAN334G from TCAN1042? Is it possible to capture the CANH, CANL, STB, and VCC waveforms when the CAN bus drops out? It'll be interesting to see what happens to…
    • Answered

  • TCAN334G: Schematic design review

    Resolved
    Part Number: TCAN334G Other Parts Discussed in Thread: TCAN334 Hi Team, Our customer will use TCAN334GDR for their application and would like to ask your help to review their schematic diagram before PCB fabrication. Here is the schematic diagram…
    • Resolved
    • Answered

  • TCAN334G: Possibility of latent failures?

    Resolved
    Part Number: TCAN334G I have a system deployed with a customer that uses TCAN334Gs for all nodes in the bus. They had an incident where 32V was shorted somewhere it shouldn't and not-surprisingly a number of the TCAN334Gs failed, but not all of them.…
    • Resolved

Didn't find what you are looking for? Post a new question.