Part Number: TDA2HG Hi team,
Here's an issue from the customer may need your help:
The RSTOUTN (F23 PIN) pin is still measured to be 3.3 V with both a pullup (3.3 V) and a pulldown applied externally.
So the customer would like to know what is the…
Part Number: TDA2HG
May I ask how many video input channels the chip TDA2HG supports?
What is the maximum video output capacity?
Is 1080p60fps split supported?
…
Part Number: TDA2HG
Hi team,
Here's an issue from the customer may need your help:
A customer's mirror product (DUT) uses the tcpip stack of the TDA2HG chip and has the following issues:
Precondition: 1. Firewall is off. 2.Normal power-on wake…
Part Number: TDA2HG Other Parts Discussed in Thread: TDA2 Hi team,
Here's an issue from the customer may need your help:
Regarding TDA2 M4 I2C, bsp_device.c / bsp_deviceI2c.c / bsp_boardTda2xx.c has been modified. The interrupt is in the system_bsp_init…
Cherry,
My first guess is to understand why the link is negotiated to 10mbps half duplex. check if there some strap pins on the PHY, then verify you can directly read PHY registers from mdio interface using the mdio-tool. last resource is to force PHY…
Part Number: TDA2HG Other Parts Discussed in Thread: TDA2SX ,
Could you replace TDA2HGBRQABCRQ1 with TDA2SXBTQABCQ1? Do you need to change the hardware?
Part Number: TDA2HG Hi team,
The chip used by the Soc is the TDA2x, and the dp83tc811r used by phy, which communicates through the rgmii mode.
1. The customer intends to set the TX_CLK divider of the TDA2x to change its frequency to 25 Mhz (current frequency…
