William,
So it sounds like you're trying to use the reduced functionality of the TDA2SA. In that case you can just use the TDA2SA based software, since you don't need the extra functionality of the TDA2SX. E.g., you can just run at 750 MHz in both…
Hi Terry,
Can you please update latest status on this thread?
Please note HSync and VSync will only be enabled if VENC is running, ie calling DISPLAYCTRL_LINK_CMD_SET_CONFIG ioctl .. If we dont call this ioctl, we will not see HSync and Vsync toggling…
Part Number: TDA2SA Hi, could you share me the TDA2x documents about Security(SPRUHS7) and Cryptographic(SPRUHS8) addendums?
we need to modify design to compliance with ISO21434, Thanks
Part Number: TDA2SA Hi team,
Here's an issue from the customer may need your help:
Why is the higher the gpu clock frequency, the higher the pvrscope tool value? Pvrscope represents the gpu occupancy rate, and normally, the higher the gpu clock frequency…
Part Number: TDA2SA Hello TI experts,
We have a failure to add custom library. Please help us to address with this.
RTOS
PROCESSOR_SDK_VISION_03_07_00_00
cross compiler : ti_components/cg_tools/linux/gcc-arm-none-eabi-4_9-2015q3/bin
Follow the steps as…
Waley, Those measured results look reasonable. The cores should default to powered off if they are unused. That may be why you're not seeing a difference.
Regards,
Kyle
Part Number: TDA2SA Hi Team,
Our customer is working with Processor SDK 3.08 which contains a package (PDK_01_10_04). One of the documents points to the link below. He would like to know where he could download the document because the processors.wiki…
Part Number: TDA2SA Other Parts Discussed in Thread: TDA2 , DP83TC811 , DP83TC811SEVM Dear TI,
We use DP83TC811 chip on our TDA2 board, and the link is ok, but we can't measure the signal on RGMII port. What is the reason? Could you please help to check…
