Part Number: TDA3MA Other Parts Discussed in Thread: SYSBIOS Tool/software: How to get the license for SysBIOS usage.
Do we need to take any addtional License to use on TDA3 ?
Regards,
Kishore
Part Number: TDA3MA Tool/software: Hello,
we have processor TDA3MARBABFRQ1
from time to time only on some ECU we figured out issue with TESOC fails: ISSDSSVIP and ISS.
we go with direction from our past tickets and switch off tests by change configuration…
Part Number: TDA3MA Hi Expert,
I configure the watchdog using the RTIDwwdWindowConfig, ,after the App restarts caused by a watchdog timeout reset，t he program runs in an endless loop in GIO_construct Called in System_uart3Init.
But the APP restarts…
Part Number: TDA3MA Hello -
Could you please assist in the solder reflow peak temperature value? The customer is unable to find this in the datasheet.
Thank you,
Reed
Part Number: TDA3MA Hi,
I wrote a small application that uses SPI to configure AWR single-chip IC,
When I start the debug it does not go to the main loop and start from the, it's actually going to boot_cortex_m.c and start from _c_int00_template(binds0…
Part Number: TDA3MA Other Parts Discussed in Thread: MATHLIB Hello,
Is there any fixed-point arithmetic library dedicated for ARM Cortex M4 processor included in TDA3x?
Best regards,
Piotr
Part Number: TDA3MA Hi, Is there any retention/static RAM (or other way) to save data to be persistent after TDA reset? We want to keep Cortex-M4 Exception reason and read it after reset. Regards, Pawel
Part Number: TDA3MA Hello E2E Support Team!
In our application, the TDA3 processor boots from a NOR FLASH chip.
As the QSPI devices are not capable of booting in the XIP mode, the boot scheme includes copying the FLASH memory contents into the system…
Part Number: TDA3MA Other Parts Discussed in Thread: AWR2243 , Hi,
The processor is in lockup when I add the link file to my project folder, I got some errors with memory allocation so I used a predefined link file to solve the issue.
I don't know…
Part Number: TDA3MA Question on behalf of a customer:
After changing Debug UART pins (from M2, R6 to W6, W7) we have no longer possibility to flash AppImage to TDA3.
As we know from datasheet TI baseline software assumes that UART3 on balls M2 …
