Because of the Thanksgiving holiday in the U.S., TI E2E™ design support forum responses may be delayed from November 25 through December 2. Thank you for your patience.
Part Number: TDA3MA
Hello Experts,
We are currently investigating DDR3 data masking usage in our application.
According to TDA3 TRM:
EMIF controller supports 8 words burst length for DDR3 memory.
L3_MAIN interconnect port of EMIF has 128-bit data bus…
Hi Piotr,
I am sorry for the late reply.
Do you mean same UART port is also connected to W6 and W7 pins? I am not sure about it. If it is, then yes, it needs to change the pinmux.
If different uart module is connected over these pins, then it requires…
Part Number: TDA3MA Other Parts Discussed in Thread: TDA3MV
The actual use of SOC chip model: TDA3MV
There are discrepancies between form information and TDA3 Datasheet information on official website.
Hi Marco, Thanks for details on the root cause. We will close this thread. Please feel free to respond on this thread if you have still have issues. - Keerthy
Part Number: TDA3MA Hi Sir,
A customer is interesting on TI product of TDA3MA.
He have some technical inquiries, could you please help me to clarify these queries?
1. What are the communication rate and working mode of csi2, SPI and QSPI, and the data…
Part Number: TDA3MA Hi Champs:
Customer using TDA3, they want to know how to enlarge the SRAM on TDA3.
Are we able to change this file?
C:\PROCESSOR_SDK_VISION_03_04_00_00\vision_sdk\links_fw\src\rtos\bios_app_common\tda3xx\dsp1\Dsp1.cfg
If we modify…
Part Number: TDA3MA
Tool/software: TI C/C++ Compiler
Our project was written in C language and optimized with intrinsic instructions for the inner loop. We needed to use the select statement for optimization, but the select statement was not found in…
Part Number: TDA3MA Hi expert,
Because customer's i2c slave chip only support address format with repeated start condition on TDA3. But we don't find any detail and example in TRM and PSDK. Could you please help to suggest how to use this mode on TDA3…
Part Number: TDA3MA
Hello,
we have been using the PINMUX tool 4.0.1537 for TDA3.
When using attached configuration one can see a pin conflict on C6 under SPI.
The conflict exists with the TIMER4, so it is correct to get a warning, but we get following…
