Part Number: TDA4VH-Q1 Tool/software: Hello Team,
I wanted to test the CPU load or max current consumed when all the cores or specific core is loaded or turned off during runtime through IPC, using RPmsg. Kinldy let me know how we can acheive this during…
Part Number: TDA4VH-Q1 Tool/software: Hi, we have configured 8CH cameras in 09_02 RTOS version and checked the display through app_multi_cam.sh.
However, if do not connect the cameras sequentially, it does not work.
For example, ch_mask 0xf works, but…
Part Number: TDA4VH-Q1 Tool/software: I want to control a gpio of TDA4VH-Q1 using the gpiod Library. For this i need to know the chip name and line number of the pin.
chip = gpiod.Chip('gpiochip xxx ')
line = chip.get_line( yyy )
how to get this information…
Part Number: TDA4VH-Q1 Tool/software: Dear Ti's expert:
The datasheet mentioned the "The SGMII interfaces electrical characteristics are compliant with 1000BASE-KX per IEEE802.3 Clause 70."
Clasue 70 70.7.2.4: Input singal amplitude section…
Hi Sai,
Sai Wang said: What if PCIe3 connect another FPGA Device (8GT/s) : can both PCIe1 & PCIe3 work fine in the same SERDES0 on 8GT/s?
I do not know for your specific case, and here is the reason why:
PCIe goes through a link training procedure…
And is there any update about question2?
Xingyu Zhu said: 2. The USS CAN output low voltage is 0.2Vio which is about 0.627V exceeding 0.6V. In this circumstance, we should use 0.6V or 0.8V?
Part Number: TDA4VH-Q1 Other Parts Discussed in Thread: TDA4VH Tool/software: Dear TI team
Power on ADCU , TDA4VH has low probability of constantly restarting.
Esm-related faults are displayed in the MCU log as below:
ESM Call back function called: instType…
Part Number: TDA4VH-Q1 Other Parts Discussed in Thread: TCAN1043 Tool/software: Hi.
I'm using TDA4VH-Q1 evm board. I'm trying to control MCAN3 or MCAN5 using MCU2_1 which is R5F. I changed pinmux just like below and checked the MCAN3_H, MCAN_L…
Part Number: TDA4VH-Q1 Other Parts Discussed in Thread: TDA4VH Tool/software: The TDA4VH User Manual in 4.3.5 OSPI Boot Device Configuration cites the boot mode supports 1S-1S-8S mode.
Questions:
1. Is the flash ID required to complete the boot process…
Part Number: TDA4VH-Q1 Tool/software: Hi would like to choose the TDA4VH-Q1 for one of my projects. My question is about IPC. In this SoC, is it possible for the A72 cores to communicate with each other, and is it possible for the R5F and DSP cores to…