Part Number: TDC7201 Other Parts Discussed in Thread: TDC7200EVM , , TDC1000 See the following for TDC7201-ZAX-EVA User Guide and page number 5 section 3. Quick start, I did follow step 1, 2, and 3 and connect TDC7201EVM board into MSP430 lauchPad.
…
I wandered about more TI website and found TDC1000-7200 EVM and bought it. I received, unpacked and tested it using the software provided but it doesn't behave as other experts and users here are claiming. But things cannot be done in a day. I'll keep…
Hi Ben,
Your code is basically identical to the TI_TDC7200_SPILongReadReg() fuction in the TDC1000-TDC7200EVM Firmware source code. Is the data you're reading correct, and the only issue is the down time for the SPI clock when shifting? In this case…
Jeffrey,
Initially, it's a good idea to follow the general guidelines outlined in document “Interfacing a water flow sensor to TDC1000-TDC7200EVM.pdf” available in this link
e2e.ti.com/.../1624680
and get your setup working. Note our experience…
Part Number: MSP430FR6989
Tool/software: Code Composer Studio
Hi
I'm working on TIDM-ULTRASONIC-TDC board and i set parameters and see the outputs through the TDC1000-7200EVM GUI. Now i want to use a micro controller instead of the GUI i get know…
Part Number: MSP430F5528 Other Parts Discussed in Thread: TDC7200 ,
Hi,
I am doing a project to measure the distance using radio waves Time of flight technology. Radio waves travel in speed of light so for travelling one meter it will take 3.33 ns…
Part Number: MSP430F5528
Tool/software: Code Composer Studio
Hi, I am using tdc1000-tdc7200evm to communicate with other board through uart from GPIO3\GPIO4. I can read from the oscilloscope that there is data transmitted, and I connect RX TX with…
Hi Koyo,
a) As the TDC1000-TDC7200EVM is sending data over USB to the GUI, we cannot support such high sampling rates. The USB latency can be as high as 5-10ms sometimes.
b) As the time of flight user is measuring can itself be the order of 50-100us…
Hi Perry,
This could possibly work. The transducer would need to create a signal that is strong enough to go through the first layer, than the air, then the second layer, through the liquid being measured, reflected back and through all the layers…
Hi guys,
recently I use my TDC1000-C2000 to test the DEF concentration, the TDC 100 spec. only give the sound speed in some concentration at the room temperature.
So I wonder whether you have more information about the speed in more concentration…
