Part Number: TFP410 Other Parts Discussed in Thread: TFP403 Tool/software: Hello E2E Experts,
Good day.
In reference to the abovementioned E2E post, our clock frequency is going to be significantly lower then 25MHz. It’s at 7,7MHz.--which is unfortunate…
Part Number: TMDS181 Other Parts Discussed in Thread: TFP403 , TMDS171 , DS34RT5110 Hi TI
We are looking for HDMI 1 to 2 solutions, port A to TFP403 and port B to the next stage. Does TI have solution for my application? or TMDS181 and PI3HDX412BD as…
Part Number: TFP401PZPEVM Other Parts Discussed in Thread: TFP401 , TFP403 Hello I can display the image on the display module. But there is fixed horizontal noise. I trying to measure the DCLK signal and found that this signal become a sin waveform not…
Part Number: TFP401A Other Parts Discussed in Thread: TFP403 , TFP401 , TFP501 Hi,
document SLLA134 shows DDC_SCL/SDZ/SA and PROM_SCL/SDA but none of them are on the TFP403/401.
Those pins are used for something else and/or there are no such signals…
Part Number: TFP401 Other Parts Discussed in Thread: TFP403 , We are looking at TFP401/TFP403 for 1920x1080 @60Hz resolution RGB output. Does TFP401 support this resolution? If not, any other recommendations from TI?
Thanks in Advance
Amit
In both cases this would require 2 devices.
For composite to YPbPr you would need a decoder (e.g. TVP5150, TVP5147, TVP5160 depending on quality requirements) followed by a video DAC like the THS8200.
For DVI to YPbPr you would need a DVI TMDS de…
Hi Elias,
Thank you for quick reply.
There is an additional question. There are following description in eratta of TFP401.
www.tij.co.jp/.../sllz036.pdf
2. Sync Detect Description 2.1 Changes to document:
TO The TFPX01 offers an output, SCDT…
Elias, thanks.
Further questions :
1. I need to use EDID because the board will need to support different resolutions. No HDCP is required so, I believe TFP403 is the correct part number to use. Again, from SLLA134, pins 92 to 94 are labelled with…
Hi Meir,
We don't have HDMI receivers that include audio capabilities.
We have TFP401 and TFP403 DVI/HDMI to RGB converters, audio has to be transmitted separately.
Regards
