Part Number: TFP410-EP Hi Team,
1. Can we directly interface this respective IC with Microsemi M2S090T?
2. If so, how to interface the I2C channels from the HDMI connector and to this IC? Because in the datasheet it is mentioned that the pull up resistors…
Part Number: TFP410-EP Other Parts Discussed in Thread: TFP410 Hi team,
Support need!
My customer said that they wanted a device, the device is shown below
DVP input and HDMI 1.4 output;
Video format supports RGB444 and YUV422 output;
supports…
Part Number: TFP410-EP Other Parts Discussed in Thread: TFP410 Hi,
I am evaluating a TFP410MEP DVI/HDMI transmitter.
Most functions seem to be OK. I2C is working RGB data is recognized correctly (H_RES and V_RES registers are correct).
Confusingly I…
Part Number: TFP410-EP The data sheet for TFP 410 MPAPREP says Ta is between 55 °C and 125 °C, which seems a little high, but is that correct? Also, what is the temperature of Tj?
Part Number: TFP410-EP The data sheet for TFP 410 MPAPREP says Ta is between 55 °C and 125 °C, which seems a little high, but is that correct? Also, what is the temperature of Tj?
Part Number: TFP410-EP Other Parts Discussed in Thread: TFP410 Hello guys,
One of my customers is considering using TFP410-EP for their next high reliable products.
They have used TFP410 for their some previous products.
They have a few questions as the…
Part Number: TFP410-EP Hi Team,
Could you please share the below to support an ongoing customer design, I can't find the info in the datasheet:
Max operating junction temperature / Tj Max
Junction to Ambient thermal resistance / Theta jA
Junction…
Part Number: TFP410-EP Hi,
For the TFP410MPAPREP, what is the I2C bus speed it is capable of? The datasheet that I can find doesn’t reference the I2C bus timing characteristics.
Thanks!
Adam
Part Number: TFP410-EP Other Parts Discussed in Thread: TFP410 , Hi team,
I understand that the DVI output voltage swing is related to R_TFADJ(TFADJ-pin's resistor), but not sure the how much the value of R_TFADJ will affect the voltage.
Could you tell…