Part Number: TIDA-00333 Other Parts Discussed in Thread: ISO3082 Hi,
In the TIDA-00333 reference design ( http://www.ti.com/lit/ug/tidu590/tidu590.pdf ), there is a critical resistor, R D , which is used in the delay of the circuit. However, that resistor's value…
Part Number: TIDA-00333 Other Parts Discussed in Thread: ISO3082 Hi,
I created the schematic in the reference design using different chips which is MAX3079. But when the float comes, the voltage value at the repeater output is in the undefined section. …
Hi Koteshwar,
We are planning to use it for 115.2kbps, will this be an issue for a 100kbps repeater per TIDA-00333? seems like it is already beyond the recommended data rate?
For the same repeater configuration, do I still need to control RE/DE separately…
Part Number: TIDA-00333 Hello! I use same one shot autodirection control schematic in my device as in TIDA-00333. According to this method RS485 line reaches full -1.5 V (driver output on A and B lines) durind 0 transmission, but reaches only litle bit…
Part Number: TIDA-00333 Other Parts Discussed in Thread: SN6501 ,
in the documents, has two -segment, if has three-segment, if the segment3 and segment2 has same GND?
i want to this repeater used for my battery management system, BMS is master, has Vcc…
Hi Saso,
Could you clarify the speed you are running this design at? 115200 k bps or 115.2 k bps? The design is not expected to work past 100 kbps but let me look into it and see if we can find you a solution.
Best regards,
Dan
Part Number: TIDA-00333 Dear Specialists,
My customer is interested in TIDA-00333.
Since they are beginners, they want design materials to understand the operation of each part of the circuit, kind of simulation design.
I couldn't find at TIDA-00333 folder…
Part Number: ISO3082 Other Parts Discussed in Thread: TIDA-00333 Hello guys,
One of our customers is considering using ISO3082 for their next products.
For the products, because they want to see the PCB layout pattern of TIDA-00333 as a refference,
they…
Part Number: TIDA-00333 Other Parts Discussed in Thread: ISO3082 In my project i'll use modbus protocol for serial communication. There are more than 320 slaves which seperated equally in 2 groups(i attached a pic to make it clear). Every 16 slaves are…
Part Number: ISO3082 Other Parts Discussed in Thread: TIDA-00333 Hi Isolation Team,
One of my customers is using a pair of ISO3082s in a dual isolated repeated configuration based on the TIDA-00333 design. No issues whatsoever when driving the RS-482…