Part Number: TIDA-010037 Other Parts Discussed in Thread: TM4C1294NCPDT , Tool/software: Hi Team,
In the TIDA-010037 reference design, the MSP432P4111 is now discontinued, so I’m looking into using the TM4C1294NCPDT as an alternative. It seems to have…
Other Parts Discussed in Thread: TIDA-010037 , ADS131M04 Hi,
Good Day.
The customer is testing the TIDA-010037 board and he runs the SW application to get measurements of energy parameters, like the voltage, current, and active power.
The update…
Part Number: TIDA-010037 Hi
In this reference design why such small input voltage is selected for the voltage sense. If the ADC has full scale of +/- 1.2V , why not use at least half of the full scale range?
In our application, the energy meter is…
Hello Chu,
This took some digging, as this was created some time ago, but here is what I discovered. The library was written for an MSP432P4111 MCU, which is no longer supported, and TI reference design TIDA-010037 . I did manage to locate the authors…
Part Number: TIDA-010243 Other Parts Discussed in Thread: ADS131M08 , , TIDA-010037 , TIDA-010036 Hi team,
I have some questions about this reference design:
In TIDA-010243, our ADS131M08 OSR is set to 512 with a sampling rate of 8KHz, can I set…
Hi CSC,
Thank you for your patience, I was able to find the site where we acquired the CTs for the TIDA-010036 and TIDA-010037. TIDA-010037 is a Split-phase metrology reference design for electricity meters that meets ANSI C12.20 Class 0.1 active energy…
Part Number: ADS130E08 Other Parts Discussed in Thread: ADS131M04 , ADS131E08 , , TIDA-010037 Hi,
I'm having some difficulty with the specification of a DSP. How to know the correct parameters like clock, bits and etc? Are there some recommended DSP…
Hello Arion,
ADS1178 has the following DC specs:
These specs do not include any errors due to external amplifiers or reference. With calibration, you can design systems around this device with total error over temperature of 0.1% or better.
If…
Hi Christos,
And you're talking about the bias current from the ADC correct? Let me check internally and get back to you in the next couple of days.
In the mean time, I would recommend you take a look at this reference design: https://www.ti.com/tool…
