Search tips
Showing 1,004 results View by: Thread Post Sort by
    Answered

  • CC2530: To communicate between the two coordinators using AF_DATA_REQUEST_EXT

    Resolved
    Part Number: CC2530 Other Parts Discussed in Thread: Z-STACK Hello, fellow developers! I’ve configured two coordinators using host + ZNP. The coordinators have PAN_IDs FFF1 and FFF2, respectively. Now, I’m attempting to use the AF_DATA_REQUEST_EXT command…
    • Resolved

  • RE: CC2652P: which folder file using of build project for CC2652P1F

    If you use ZNP, you need to use another host application such as ZTool to run application. Do you use ZTool or other host application when you test ZNP?

  • RE: CC2530: MAX_NODE_DEPTH

    Hello Ryan, in the screenshot I am using Z-Stack 2.5.1a, I just want to test this feature. In fact, I plan to use ZNP + host to implement a system where each layer can only connect to three routing devices, with a maximum of three layers. The coordinator…

  • RE: INVALID_PARAMETER after spamming commands.

    This is the expected result. You will need to stop spamming commands or modify the ZNP project to ignore spam commands from your host. Regards, Ryan
    • Answered

  • RE: Zone Status Notification Change seen in sniffer but not in serial port.

    Resolved
    Host Application is written in Java. Yes, ZNP running on dongle
    • Answered

  • RE: How to create a device group.

    Resolved
    As I had replied, you can send ZCL group add command from Host/ZNP to the device.
    • Answered

  • RE: LP-CC2652R7: The lock-app program in the CC2652R7 burn connecthomeip example cannot connect to the Raspberry Pi boundary route.

    Resolved
    What Linux Matter host is connected to the ZNP, and what Matter device are they attempting to connect? Have they confirmed that the OpenThread Border Router is operational? Please have the customer provide the chip-tool terminal log and CC2652R7 Matter…

  • RE: CC2538-CC2592EMK: How to configure power in Z-stack to amplify CC2538-CC2592EMK output power?

    generic_app is fine. ZNP stands for Zigbee Network Processor and it requires another host MCU to configure ZNP to function as Zigbee coordinator, router, or end device.
    • Answered

  • RE: (CC2562P) Correct Bind Packet but RSP has Status 0x84

    Resolved
    You should use CCS debug function to download and connect ZNP to debug. I would suggest you to use Ztool as host when you debug ZNP.
    • Answered

  • SK-AM64B: AM64x UART Initialization Procedure

    Resolved
    Part Number: SK-AM64B I started using the pre-built image version 09.02.00.08. I'm trying to use the UART method to boot the eval board into Linux and subsequently write a firmware image to the (blank) sdcard. Following instructions from:…
    • Resolved

Didn't find what you are looking for? Post a new question.