Hello sanjay,
You will need to access the UART peripheral RX/TX pins used to communicate with a host, which are further detailed in the guides YK provided. You can begin evaluation by establishing a connection to the ZNP using Z-Tool. There are similar…
Part Number: CC1352P Hello Community,
I am working on the CC1352P ZNP device with the Raspberry Pi Board & ZNP-Host-Framework Application.
I would like to provide authentication to the CC1352P over UART Communication.
So that, Only authenticated…
Hi Robert,
You could use a Packet Sniffer to confirm that the network is still operation, or a micro USB connection to a host PC with the LAUNCHXL-CC26X2R1 XDS110 to further test the ZNP software stability. This would confirm that the issue remains…
Thanks for clarifying. The host application layer is not notified when Z-Stack ZNP sends the NWK key to joining devices. You could modify the ZNP firmware accordingly for a custom message to be interpreted by the host application.
Regards, Ryan
You would need to rebuild the ZNP project to enable these settings. You can consult the Zigbee2MQTT forum and/or develop your own host application solution. The APIs do not change over-the-air packet structure, simply initialize the SimpleLink OSAL UTC…
You could try increasing the expirytime.tv_sec timeout from <gateway install>/source/Projects/zstack/linux/srvwrapper/api_client.c to compensate for any unexpected delays from the ZNP.
Matt Kenyon said: The zed_ota_client example works most of the time…
Part Number: CC1352P Other Parts Discussed in Thread: AES-128 Hello Community,
I am working on a CC1252P ZNP device with raspberry pi & ZNP-Host-Framework Application.
I would like to implement the AES authentication for the CC1352P ZNP device.
…
Hi Danilo,
Z-Stack 3.0.2 is the latest and most recommended stack which has been proven capable of joining Home Assistants. Z-Stack HA 1.2.2a is also suitable for most Smart Home environments, however it may also depend on the network they are attempting…
Part Number: TMDS64EVM Tool/software: Hello TI,
We are trying to do DFU programing on the TMDS64EVM "AM64x EVM", but it is failing with the error "Invalid DFU suffix signature A valid DFU suffix will be required in a future dfu-util release". Please…
Part Number: SK-AM64B Other Parts Discussed in Thread: TMDS64EVM I have two SK-AM64B eval boards, one with the rework suggested in https://e2e.ti.com/support/processors-group/processors/f/processors-forum/1274375/sk-am64b-usb-dfu-boot?tisearch=e2e-sitesearch&keymatch…
