Because of the Thanksgiving holiday in the U.S., TI E2E™ design support forum responses may be delayed from November 25 through December 2. Thank you for your patience.
Part Number: TIDEP-0101 Hello,
I would like to run Demo TIDEP-0101.
Hardware: AM4037 IDM
Software:
CCS8 .1.0.00011
PRU-ICSS-Industrial_Drives-01.00.02.03
ti-processor-sdk-rtos-am437x-evm-05.01.00.11
OS: Windows 10 Pro Version 21H1.
I tried running the…
Part Number: TIDEP-0101 Other Parts Discussed in Thread: MMWCAS-DSP-EVM , MMWCAS-RF-EVM
Hi there,
According to what I understand, The MMWCAS-DSP-EVM and MMWCAS-RF-EVM are two separate boards. Figure 16 below is the entire function of the two boards or s…
Part Number: TIDEP-01012
Hi,
If I have to choose between Velodyne Lidar and TI mmWave solution, is the mmWave provides same level of accurate mapping as Lidar? does TI mmWave solution provides point clouds? What can't be done with TI mmWave compared…
Part Number: TIDEP-0101
Hello,
I would like to run T IDEP-0101 with TS5643N100 (specification document TS5643N100.pdf )
1.Is it possible to communicate with TIDEP-0101 with TS5643N100? There is a serial signal format in the document.
2.When using TS5643N1…
Part Number: TIDEP-0101 Hello,
I would like to run Demo : TIDEP-0101 using TS5668N20 As attached document. ourdev_609525UL3FP9.pdf
1.Is this encoder possible to communicate with TIDEP-0101?
2.When using TS5668N20, what kind of place of software needs to…
Part Number: TMDSIDK437X Hello,
I am looking to interface with a Tamagawa encoder using this setup: https://www.ti.com/tool/TIDEP-0101#1
I have the example program compiled, and a working debug session by first connecting to the CortexA9 target and then…
Part Number: AM4376 Other Parts Discussed in Thread: TIDEP-0101 ,
Dear Champs,
My customer is to implement RS422 on the PRU to reduce CPU(Cortex-A9) redundancy loads and I'm trying to provide some guide for their PRU-UART implementation.
I know there…
aren't all TS5643N100 absolute encoder T-format?
If the encoder outputs the following, does that means its T-format?
Can the following product be used with this?
www.ti.com/.../TIDEP-0101
Thanks for all your help
Hi,
I am checking internally on how to run the demo if you are not an ETG member. Will respond here when I get a response.
For the Tamagawa encoder question:
Section 8 of the TIDEP0025 Design Guide gives instructions on how to switch the encoder being…
Part Number: AM5706 Other Parts Discussed in Thread: TIDEP-0101 , AM5716
Tool/software: TI-RTOS
Dear Champs,
Is it possible to run 2ch Tamagawa Encoder and EtherCAT together on AM5706?
When I checked AM437x Tamagawa Encoder reference design(TIDEP-0101…
