Hello Levi,
the TIDM-NFC-READER is no longer available and no longer supported.
The TRF7970A reference design can be found in chapter 7 of the datasheet or in chapter 3 of the FAQ document .
Design and layout guidelines can be found in the design guid…
Part Number: RF430FRL152H Hi team,
My customer has some question want to check,
1. For the Active Mode (AM): 140 µA/MHz (1.5 V), is this power consumption related to the clock. if the f is 2MHZ, the max power consumption will be 240?
2, how the…
Part Number: TIDM-BIOSIGNMONITOR Dear team,
We would like to use the BLE instead of NFC in the BIOSIGNMONITOR.
Will TI have any recommendation in BT 5.x module? Or we should migrate from MSP430 to MSP432 (or other platforms)? Because I have not to find…
Part Number: TIDM-NFC-READER Hello,
TIDM-NFC-READER is not getting connected to GUI.
I made this board from third party manufacturer with the Gerber data available on web https://www.ti.com/tool/TIDM-NFC-READER#applications .
Then I uploaded the code …
Part Number: TIDM-NFC-EZ430-MODULE Hi team, Our customer has EZ430-CHRONOS-868 that we found already obsolete device. He needs the Linux software for this device and I see that the link ( ) is not anymore working. Can you still able to provide the software…
Part Number: TIDM-NFC-EZ430-MODULE Tool/software: TI C/C++ Compiler hello,
I need the code used in CODE COMPOSER STUDIO of EZ430-CHRONOS-868 MODULE(on the part number at me is write this : EZ430-CHRONOS-868) , i use the code from a project on my university…
Make sure that the current sensing signals are good for build level 3 & 4. And set the correct ADC scale value (USER_M1/2_ADC_FULL_SCALE_CURRENT_A) in user_mtr1/2.h. And also set the right "sign" for the current coefficient based on the sampling circuit…
Part Number: TIDM-02010 Hi
While testing for PWMs, we are able to see PFC PWM signals. But, when Motor[0] flag is enabled module over current occurs. Can I know how it is possible to over come this.
Part Number: TIDM-02010 Hi
We are trying to drive a 5kW PMSM through the 1.5kW HVAC drive of TI.
We are using the same tidm-02010 and dual motor control algorithm for driving the motor.
We have changed the motor parameters according to 5kW motor and when…