• 

  HS WG-FAE

  • 1 month ago
  • Interface
  • Interface forum

  TIOL111: Pull up resistor size

  • Resolved

  Part Number: TIOL111 Hello, customer ask what pull up resistor sizes for the WAKE and NFAULT pins
• 

  Iwata Etsuji

  • 4 months ago
  • Interface
  • Interface forum

  TIOL111: TIOL111 RX state in EN=L

  • Resolved

  Part Number: TIOL111 Hello team, Could you please clarify the RX state in EN=L? Best regards, Iwata
• 

  Kazuya Nakai59

  • 4 months ago
  • Interface
  • Interface forum

  TIOL111: Can TIOL111 be used with 48V L+?

  • Resolved

  Part Number: TIOL111 Hello guys, One of my customers is considering using TIOL111 for their next
• 

  Roman Kellner

  • 5 months ago
  • Interface
  • Interface forum

  TIOL111: TIOL11 or similar IO-Link Trasnceivers capable of detecting wake up when configured as input (DI)?

  TI Thinks Resolved

  Part Number: TIOL111 Hello TI We need the C/Q pin 4 as a device digital input for a device which will have an analog out on pin 2. Do your IO-Link transceivers support wake up detection when configured as an input (NOT driving as output)? Kind...
• 

  Shunsuke Nagata

  • 7 months ago
  • Interface
  • Interface forum

  TIOL111: ESD - Contact discharge IEC61000-4-2

  TI Thinks Resolved

  Part Number: TIOL111 Hi, I would like to check Passive level for IEC61000-4-2. The level is +/-4500 V. The meaning of EN=TX=HIGH is turning on low-side FET. Why does the case which turn on low-side FET weak rather than other case? I guess the internal...
• 

  PULLA RAO CHILAKALA

  • 8 months ago
  • Interface
  • Interface forum

  TIOL111: io link

  TI Thinks Resolved

  Part Number: TIOL111 I want to use TIOL111 in my design. i want to derive L+ and L- internally of my PCB and only i want to expext CQ externally. Can i do like this or not ?
• 

  matusan

  • 2 months ago
  • Simulation, hardware & system design tools
  • Simulation, hardware & system design tools forum

  TIDA-010016: TIDA-010016 demo behavior

  • Resolved

  -system-design/f/234/t/814827 Now I am investigating the TIOL111 (Tx/Rx) data by connection Autosen(AO001
• 

  Iwata Etsuji

  • over 1 year ago
  • Interface
  • Interface forum

  TIOL111: TIOL111-3 internal LDO PSRR

  • Resolved

  Part Number: TIOL111 Hi team, Could you please share the graph of PSRR vs. Frequency for TIOL111 -3
• 

  Max Robertson

  • 11 months ago
  • Interface
  • Interface forum

  RE: TIOL111 bidirectional level shifter

  Hi Venkstesh, The CQ output used a push pull output design that is powered by the L+ voltage rail (nominally 24 V). This means that it is capable of level shifting without requiring external pull-up/pull-down resistors and can source a level of current...
• 

  Jonathan Nerger

  • 2 months ago
  • Interface
  • Interface forum

  RE: TIOS101: Fault conditions prevention

  Hello Muni, I am not aware of a standalone 1-wire polarity protection device. If you look at the Block Diagram of the TIOS101 you will see a number of diodes connected on the right side of the device between the transistor driver stack and the output...

Didn't find what you are looking for? Post a new question.

• Ask a new question