Part Number: TIOS101
Hi Team,
customer tested the OCP function with the below schematics and found the problem.
V+=24Vdc, Vcc=3.3V, output is PNP or NPN type loading.
The test result as below.
output type
OCP startup value
…
Part Number: TIOS101 Other Parts Discussed in Thread: TIOS102 , UCC27517 What does residual voltage mean for the TIOS101? We will be using it in push-pull mode. Does is means the output will not drive all the way to 0V when the input is high? We want…
Part Number: TIOS101 Hi team,
The NFAULT behavior seems different from datasheet description. Could you give me your advice?
There is 400mA-500mA output current when they drive a relay unit. ILIM_ADJ is open. NFAULT is pulled up to 3.3V.
They expect…
Part Number: TIOS101
Hi Team,
I have a question about TIOS101 abso max ratings and driving inductive loads.
TIOS101 CQ pin abso max is ±65V(transient pulse width < 100us for VCC and OUT). "9.2.2.3 Driving Inductive Loads" mentions a significant…
Part Number: TIOS101 Hello, TOIS101 datasheet specifies "OUT pull-up/down current" as 50uA. My customer would like to know where this leakage current come from in the device to understand this device behavior. Could you please explain it?
Regards, …
Part Number: TIOS101 I'd like to use the TIOS101 in a 24V-48V application.
The datasheet shows an absolute max rating on VCC and OUT of 55V, but a recommended max of only 36V. What is the reason for the wide difference in absolute vs recommended? Is…
Part Number: TIOS101 I am using the TIOS101 (no internal LDO) in a circuit where the VCC_IN can be un-powered and VCC pin can be powered or vice versa.
I noticed that when VCC_IN is un-powered and the VCC pin is powered (24V), the VCC_IN pin continually…
Part Number: TIOL1115 Other Parts Discussed in Thread: TIOS101
Hello,
My main application is to integrate the magnetic reed sensor switch to activate and deactivate the output which are pilot valves.
I had planned to connect the sensors directly…
Part Number: TIOS101 Other Parts Discussed in Thread: TLV760
Hello Team,
in regards to the following info:
LDO output voltage across temperature
Output current vs. Input voltage (beside the thermal limitation that may apply)
Do we have the…
