Part Number: TLK1501EVM Other Parts Discussed in Thread: TLK1501 Tool/software: Hi, I am trying to read data through TLK1501EVM, we are receiving data through fiber optic cable and want to read RX[0:15] using logic analyzer. I can verify that Optical…
Hello Rodrigo,
Yes sir, I have checked to ensure pins 1 & 2 are jumpered together on J5. I'm supplying and CMOS level clock to J8 on the SMA connector. I've also ensured that the PRBSEN jumper on J7 is removed so that R11 is pulling PRBSEN high. …
Part Number: TLK1501EVM Other Parts Discussed in Thread: TLK1501 Hi, Good day. Our customer has a question regarding the TLK1501EVM. Kindly see below. ""I have a doubt about the use of the 10nF capacitor connected to ground between the two 50ohm termination…
Part Number: TLK1501EVM Other Parts Discussed in Thread: TLK1501 Hello,
I need a clarification about the use of the 10nF capacitor connected to ground between the two 50ohm termination resistors on the evaluation board of the TLK1501 (RX lines).
On…
Part Number: TLK1501EVM Other Parts Discussed in Thread: TLK1501 , Hello,
I asked this question over a year ago.
I have two TLK1501 EVM boards.
Each one has a high precision 62.5 MHZ oscillator with < 20ppm error. Frequency counter measures…
Part Number: TLK2711-SP Other Parts Discussed in Thread: TLK1501EVM When in PRBS mode, RKLSB indicates a pass/fail result. Does RKLSB change on every RXCLK, according to the validity of the data that was received? i.e. can this be used to count the number…
Hi,
Your configuration looks correct and based on your data captures, it appears that the TLK receiver is achieving alignment correctly. Your data captures indicate that the receiver sporadically sees errors, and the RXD values mirror this.
What are…
