Part Number: TLV320AIC29 Hi TI engineers,
In the process of using AIC29, I found that the channel of audio output cannot be switched from the differential path (OUT32N&SPK1) to another path (SPK2). How should I configure the registers?
Part Number: TLV320AIC29 Hi team
When customer used the codec chip TLV320AIC29IRGZ, we found that the pin15 vbat battery voltage monitor pin of the chip was probabilistically damaged when the EE turn on by an switch. and the damage phenomenon is VBAT…
Part Number: TLV320AIC29 dear
customer use TLV320AIC29+TPA2011,output waveform is chopped,Distortion reach 20-30%,customer wants modify the register value to change target gain , to reduce distortion, but what is register value work?
thanks in ad…
Part Number: TLV320AIC29 Hi team,
ZTE is using TLV320AIC29 on their network equipment, for some purpose, they want to know the delay time from the digital to the analog. We do not have the data on the datasheet. So could you help to provide the data…
Other Parts Discussed in Thread: TLV320AIC29 , TLV320AIC3204 Hi, Team
My customer wants to check if TLV320AIC29 can support Digital loopback. I don't see any details in datasheet to work in this mode.
The reason is they want to adjust the voice from…
Other Parts Discussed in Thread: TLV320AIC29 , TLV320AIC28 Hi, Team
I checked all related topics in e2e, there are some devices with linux driver, but i don't find one for TLV320AIC29.
My customer Hytera is asking about this support.
Can you please…
Hi
I have a new system with omapl137. i used tlv320aic29 in my board. tlv320aic29 connected to omapl137 with spi1 and mcasp1. i attached the shematic.
i connected the headphone to (INT_MIC+ and MIC_GROUND) and the speaker to (AF-OUT+ and AF-OUT-)…
Other Parts Discussed in Thread: TLV320AIC29 Hi
I have a new system with omapl137. I used tlv320aic29 in my board. this codec connected to omapl137 with spi1 and mcasp1. I attached the shematic.
I connected headphone to (INT_MIC+ and MIC_GROUND) and…
Other Parts Discussed in Thread: TLV320AIC29 Hi
I have a new system with omapl137. i used ambe3000 and tlv320aic29 in my board . tlv320aic29 connected to ambe3000 with spi and ambe3000 connect to omapl137 with mcasp. I need a simple reset circuit. i…
Part Number: PROCESSOR-SDK-OMAPL138 Other Parts Discussed in Thread: TLV320AIC29 , OMAPL138 Hello!
I'am using OMAPL138-C6748 Processor to finish the data transmition with EDMA by Peripheral configuration bus. MCASP finishes the data transmition with…
