You can utilize snd_soc_component_update_bits and snd_soc_component_write in code to do the i2c write, these functions have the feature of automatic page switching.
In alsa, we use amixer controls to switch the input and output routing paths, you can check…
Part Number: TLV320AIC3106-Q1 Other Parts Discussed in Thread: TLV320AIC3106 Team,
As I can see in the D/S of TLV320AIC3106, we support the diagram as below.
Currently I want to let processor1 and processor2 communicate directly by I2S via AIC3106, which…
Part Number: TLV320AIC3106 Hi,
We are using TLV320AIC3106IRGZR in our custom board.
Through I2S sending the audio and getting the speaker output only on LEFT OP and LEFT OM but not able to get anything on the RIGHT OP and RIGHT OM channel.
Attached is…
Part Number: TLV320AIC3106 Hi,
The customer specifies that the input/output for this codec is a 3.5mm 4-pole TRRS connector.
However, to achieve the functionality of "1x audio out, 1x microphone, and 1x stereo line in":
(1) Is it feasible? …
Part Number: TUSB8020B HI
Voltage in DN1_VBUS and DN2_VBUS 5V .enabled but if plug in USB devises Mouse Or Pen drive not recognized . schematic attached
Part Number: TLV320AIC3106 Hi, We are using TLV320AIC3106 audio codec with imx8mp from phytec. We see that sound card is detected but we are not able to hear any audio when we connect through headphone. We have attached the device tree and dmesg logs for…
Part Number: TLV320AIC3106 Hello,
I am trying to interface a sinusoidal waveform to the codec Ic TLV320AIC3106. Attaching the schematic for your reference. I have interfaced the Codec to AM335, where the debian OS is running. I am using arecord to record…
Part Number: TLV320AIC3106 Hi,
Could anyone tell me what problem might arise on the ADC side when the sample rate is set to, say, 4096 Hz?
Best regards,
Bruno