Part Number: TLV320AIC3111 Other Parts Discussed in Thread: TSC2117
Tool/software:
Hi
I want to use PurePath studio to configure MiniDSP.
But when I download and run my project, no sound output.
Meanwhile if I use TLV320AIC3111EVM Software to control…
Part Number: TLV320AIC3111 Tool/software: Hi,
We have a TLV320AIC3111 connected to an imx8MP. There are no other IC's connected to this bus.
The issue is that for some reason we can't get reliable communication over I2C when using the TI kernel driver…
Part Number: TLV320AIC3111 TLV320AIC3110 Other Parts Discussed in Thread: TLV320AIC3110
Tool/software:
Hi
I use TLV320AIC3111/ TLV320AIC3110 for my design, but I can't find how to generate ADC/DAC Biquad Filter Coefficients and ADC/DAC FIR Filter Coe…
Part Number: TLV320AIC3111 Hello Forum,
I am trying to test a product with a TLV320AIC3111 Codec with a Raspberry pi Zero W but i cant get it to work.
I've adeed the tlv320aic31xx driver from: https://github.com/torvalds/linux/blob/master/sound/soc…
Part Number: TLV320AIC3111 Hello,
I am trying to set up an AGC on the TLV320AIC3111. I am looking at an example from the SLAA446 application note on setting it up. The example found in section 1.4 number 2 (see below), they are saying to set the attack…
Part Number: TLV320AIC3111 Other Parts Discussed in Thread: DRV135 hello
The DAC being developed requires Left and Right 1/4" Unbalanced output and XLR Balanced out.
I'm using TLV320AIC3111.
Is there any way to use Balanced Speaker output as…
Part Number: TLV320AIC3111 Hello, I am trying to configure Linux kernel to enable drivers for TLV320AIC3111 and have followed the steps shown on the following page.
https://www.ti.com/tool/TLV320AIC31XXSW-LINUX#description
I am trying to enable this…
Part Number: TLV320AIC3111
I am trying to configure TLV320AIC3111 as an input only mode. I am able to get the audio samples but have one issue now. While there is no audio, there is some sound heard which I think is because of some misconfiguration of…
Part Number: LINUXSDK-OMAPL138 Hello, trying to test microphone that is on the eval board and have issue with it. I have set the jumpers to Diff Mono but still can't test the microphone.
And on 2nd attempt we are always getting 'read error
root…