Part Number: TLV705 Hi Sir,
Would you please helping to check which pitch is A1 at TLV70530YFMR? is A1 is at the blue square I draw at the fig? Thanks for your kindly help.
Best regards,
Gary Teng
Part Number: TLV705
Hi Experts,
I have this client who is having hard time identifying the pin numbering of our small LDO device, TLV70518YFMT.
At first, I am thinking that by looking at the surface of this device, showing a dot mark, would help…
Part Number: TLV705 Hi Team,
1. Is there any measurement data or curve about Tj to output accuracy?
2. I found the most related curve is figure6 in datasheet, but does TI has the same curve in 3.6Vout?
3. If not, then how can I expect the deviation…
Part Number: TLV705 Hi Team,
According to Figure3., the accuracy is about 0.5% over temp., may I know what condition could make the output accuracy up to +/- 2%(from datasheet 6.5)?
Thank you very much.
Best regards,
C.T.
Hi Expert,
My customer would like to know is there any side effect about Enable pin and Vin power sequence.
If EN pin signal is enable before Vin power source, is there any side effect ot is this not allowed?
Please advise.
Thanks
Part Number: TLV704 Other Parts Discussed in Thread: TLV705 Hi Team
Can you help to provide the thermal data of TLV705 at this set up: Vin=15V, Vout=3.3V@10mA in our EVM?
Part Number: DS90UB953-Q1 Other Parts Discussed in Thread: TLV705 Hi,TI:
DS90UB953 chip heat is serious.
1. Our PCB adopts a 6-layer stacked design, the thickness of PCB is 0.2mm, the size is 5.5X11mm.
2. DS90UB953 chip heat is serious, which can…
GPIO28 is connected to EN of this LDO which draws 10nA: https://www.ti.com/lit/ds/symlink/tlv705.pdf?HQS=TI-null-null-digikeymode-df-pf-null-wwe&ts=1600904541651
We're at 3.3V and there is a 100k pull down. That puts us at 33uA + 10nA. Too high for…
Hi Kai,
The maximum height for TPS7A10 in the YKA package is 0.4 mm.
TLV705 has three DSBGA packages each with a different maximum height. The PicoStar package has a maximum height of 0.15 mm.
Very Respectfully,
Ryan
