Part Number: TM4C123BH6PZ Other Parts Discussed in Thread: EK-TM4C123GXL Hi all,
MSP430 and MSP432 series chips are used in our company.
The code of the products are all designed with register level.
Now, we need to create new product and TI suggest us…
Part Number: TM4C123BH6PZ Hi TI Team,
While evaluating with the JTag Software we are encountering the Syntax error in the 252 Line regarding the
"phase error, expecting ATTRIBUTE_Boundary_Length' and 'attribute INSTRUCTION_PRIVATE' …
Part Number: TM4C123BH6PZ Hi. I have a problem with TM4C123BH6PZ: I can download the code once or several times via CCS, then I cannot download and I get this error:
I checked that the connecting wire is correct and measured the VDDC pin = 1.21V..
…
Part Number: TM4C123BH6PZ TI Microcontroller is used to monitor and controls the Mains 2 and Output Voltage feedback adc sensing, Heatsink temperature monitoring for the Mains 2, RS232 Communication, PSU Error detection, UPS hardware revision detection,…
Part Number: TM4C123BH6PZ How to display the EEPROM inside TM4C123BH6PZ by CCS using debug probe XDS110, all the data from 0x400AF000 display as ????????.
Hi Xenon,
Xenon Li said: They just want to confirm if they do not use the internal EEPROM and with same power supply as TM4C123BH6PZI has, the TM4C123BH6PZI7 is a drop-in replacement solution.
Yes, under those conditions it should be a drop-in replacement…
Part Number: TM4C123GH6PZ Other Parts Discussed in Thread: TM4C123BH6PZ Hi Champs,
My customer wants to replace TM4C123 B H6PZ by TM4C123 G H6PZ. So far, I've only seen that the 2 ICs are different in operating temperature range only.
The new IC ( TM4C1…
Part Number: TM4C123BH6PZ
Hi TI,
We have been conducting some ESD testing on a design using this microcontroller, and believe we are triggering the ESD clamp during an ESD event.
The datasheet doesn't describe the behavior we should expect for the clamp…
Part Number: TM4C123BH6PZ Other Parts Discussed in Thread: UNIFLASH Hi team,
Here's an issue from the customer may need your help:
Customer want to use LMflash software with XDS110 proble to flash the hex code to their hardware with TM4C123BH6PZ…
Part Number: TM4C123BH6PZ Dear Champs,
I am asking this for our customer.
The user is asking if JTAG can be disabled or disconnected permanently or by passwords to avoid hacking into RAM access?
Is there any register or any way for this purpose?
Wayne…
