Part Number: TM4C123GE6PZ We capture the similar waveform for XOSC1 pin on both Customer Board and TI LanuchPad as below, Customer ask what is the reason for the waveform is not pure sine-wave? What MCU performance it will affect?
Part Number: TM4C123GE6PZ
Do we have document to show how UART module to determine the each bit value? I know there are internal 16 or 8 clk samples for each bit, but how many samples could decide the bit value is 0 or 1?
Part Number: TM4C123GE6PZ I need help for a very urgent case about M4 in Customer Product.
Customer found their product will totally stop working if put strong EMI source close to the M4 device for a while (around 1 hours), in this case, M4 all pin…
Hello ！
I have a problem about the hibernate of Tiva MCU. The code is put below.
SysCtlPeriEnable(SYSCTL_PERIPH_HIBERNATE);
SysCtlDelay(2 *(12000000UL));
HibernateEnableExpClk(SysCtlClockGet());
SysCtlDelay(25 *(12000000UL / 1000)); HibRTCSet…
Part Number: TM4C1233H6PZ Other Parts Discussed in Thread: TM4C1233E6PZ , TM4C1237E6PZ , TM4C1237H6PZ , TM4C123GE6PZ , TM4C123GH6PZ , EK-TM4C123GXL Hi ,
We would like to replace ST uC STM32F103RBT6 with TI TM4C1233H6PZI in our existing design, please…
Hello Miranda,
We have a set of TM4C123x devices which will meet these requirements. Dual CAN Bus plus USB is not available on all TM4C123x devices, and 50 GPIO are only offered on larger package types. The devices which offer this set of requirements…
Part Number: CC256XB-BT-SP Other Parts Discussed in Thread: TM4C123GE6PZ Dear support team
We develope an USB Stick to connect some Bluetooth devices. I connect the devices over SPP_Open_Remote_Port.
I want to change the timout of the port open…
Other Parts Discussed in Thread: TM4C123GE6PZ hi all,
I am working on a USB Device application on ARM M4(TM4C123GE6PZ).
I am using USB Device Class Device protocol for USB Communication on Arm m4.
Details as follows:
1. Here Computer is Host and…
Other Parts Discussed in Thread: TM4C123GE6PZ Are any .bxl files available for the Tiva-C processors?
I am getting close to doing the PCB layout for a design using the TM4C123GE6PZ.
Either a .bxl file or footprint file for Eagle version 5 will be…
