Part Number: TM4C1294KCPDT Other Parts Discussed in Thread: EK-TM4C1294XL Tool/software: I am using the development board EK-TM4C1294XL
The two tactile switches on the board (USR_SW1) and USR_SW) do not do anything.
We compiled the program for polling…
Vishnu Natarajan said: Like I said before our primary concern is regarding the initial state of the EEprom data. As you mentioned, a virgin controller should not have data in the EEprom. However, we found that the procured controllers contain data upon…
Part Number: TM4C1294KCPDT Tool/software: Hi,
I am using CCS12.8.1 version, while build my code screen shows error as like below
Help me to short out.
Thanks by
Santhosh
Part Number: TM4C1294KCPDT Tool/software: I want to use a GPT One-shot to generate a software triggered pulse. My code is:
TimerDisable(TIMER4_BASE, TIMER_B);
TimerConfigure
(
TIMER4_BASE,
TIMER_CFG_SPLIT_PAIR | TIMER_CFG_B_ONE_SHOT…
Part Number: TM4C1294KCPDT Tool/software: Hi Team,
My customer has a question about the JTAG debugger to be used with the TM4C1294KCPDT device.
Regarding the signal connections between the emulator and target device, is there any board to connect the…
Part Number: TM4C1294KCPDT Other Parts Discussed in Thread: TM4C1294NCPDT Tool/software: Hi experts,
My customer wants to configure flash mirror mode using TM4C1294KCPDT.
some E2E link say that TM4C1294KCPDT does not work in mirror mode.
https://e2e…
Hi,
I have not heard back from you. Hope your issue is resolved. I will close this thread for now. If you have any update you can write back to this post and the status will automatically change to OPEN.
Part Number: TM4C1294KCPDT Other Parts Discussed in Thread: TM4C1294NCPDT , EK-TM4C1294XL Tool/software: Dear Team,
We are using TM4C1294KCPDT based customized board for one our application which uses TCP/IP communication and RS-232 Communication. For…
Part Number: TM4C1294KCPDT Tool/software: We are bringing up a new board and are not able to get the debug probe to connect. From CCS we get an error dialog with the text:
Error connecting to the target: (Error -2062 @ 0x0) Unable to halt device. Reset…
