Search tips
Showing 648 results View by: Thread Post Sort by
    Answered

  • TM4C1294KCPDT: TM4C1294KCPDT Debug

    Resolved
    Part Number: TM4C1294KCPDT Other Parts Discussed in Thread: TM4C1294NCPDT , Hi Team, The original chip is TM4C1294NCPDT. Now the chip is replaced with TM4C1294KCPDT. There is no change in the program, and there is no problem in rebuilding the project…
    • Resolved
    • Answered

  • TM4C1294KCPDT: TM4C1294KCPD . Error when start debug: GEL : file xxx.out Does not match the target endianness, not loaded.

    Resolved
    Part Number: TM4C1294KCPDT Tool/software: Dear All, I'm use CCS12 with TM4SDK . I've made a simple program just to check all compiler processor. Compile seem Ok with out errors, but when load the firmware on TM4C1294KCPD (my board), I receiv error…
    • Resolved

  • TM4C1294KCPDT: TM4C1294KCPDT goes to FaultISR when SysCtlClockFreqSet() called

    TI Thinks Resolved
    Part Number: TM4C1294KCPDT Other Parts Discussed in Thread: TMDSEMU200-U I am trying to program TM4C1294KCPDT using the TMDSEMU200-U debugger for my custom board. when i debug the code it downloads the image successfully, then after running the code…
    • Answered

  • TM4C1294KCPDT: GPT One-shot time only generates one pulse per processor reset

    Resolved
    Part Number: TM4C1294KCPDT Tool/software: I want to use a GPT One-shot to generate a software triggered pulse. My code is: TimerDisable(TIMER4_BASE, TIMER_B); TimerConfigure ( TIMER4_BASE, TIMER_CFG_SPLIT_PAIR | TIMER_CFG_B_ONE_SHOT | TIMER_CFG_B_ACT_SETCLRTO…
    • Resolved
    • Answered

  • TM4C1294KCPDT: XDS110 connection error with new board design

    Resolved
    Part Number: TM4C1294KCPDT Tool/software: We are bringing up a new board and are not able to get the debug probe to connect. From CCS we get an error dialog with the text: Error connecting to the target: (Error -2062 @ 0x0) Unable to halt device. Reset…
    • Resolved
    • Answered

  • TM4C1294KCPDT: Microcontroller won't restart after a SysCtlReset()

    Resolved
    Part Number: TM4C1294KCPDT Tool/software: Dear support, Note: The datasheets I'm referring to below are TivaWare Peripheral Driver LIbrary User's Guide Microcontroller Datasheet - TM4C1294KCPDT I have integrated the microcontroller into my own…
    • Resolved

  • TM4C1294KCPDT: Receive EPI data using uDMA

    Part Number: TM4C1294KCPDT Our application receives blocks of 6,964 bytes of data streamed from an FPGA every 50ms. Our initial implementation used a 32-bit EPI data bus with a request-to-send signal sourced by the FPGA. The request-to-send signal triggers…
    • Answered

  • TM4C1294KCPDT: Source resistor for ADC input

    Resolved
    Part Number: TM4C1294KCPDT Hello team. On Figure 15-7, diagram shows tthat, Rs is needed for ADC antialiasing filter. Looks like the value of Rs is written on the Table 27-44, which is 500Ω. Is Analog source impedance of 500Ω = Rs of ADC input filter…
    • Resolved

  • TM4C1294KCPDT: Loading Firmware through UART using LM Flash Programmer

    TI Thinks Resolved
    Part Number: TM4C1294KCPDT Other Parts Discussed in Thread: TM4C1294NCPDT , EK-TM4C1294XL Tool/software: Dear Team, We are using TM4C1294KCPDT based customized board for one our application which uses TCP/IP communication and RS-232 Communication. For…
    • Answered

  • TM4C1294KCPDT: SSI3 with Legacy mode

    Resolved
    Part Number: TM4C1294KCPDT Hello team, Is it possible to use Fss, SSI3XDAT1, DAT2 as GPIO, when using SSI3 with Legacy mode? Best Regards, Kei Kuwahara
    • Resolved

Didn't find what you are looking for? Post a new question.