Part Number: TM4C1299KCZAD Other Parts Discussed in Thread: UNIFLASH , SYSCONFIG Hi,
I'm currently using a TM4C1299KCZAD in my project, and I was able to successfuly program the microcontroller and run the PWM led example from TIREx after modifying it…
Part Number: TM4C1299KCZAD DEARS:
Could you please help to provide the Radiation test report of TM4C1299KCZADI3R? With frequency 30M to 1GHz..
Test result as below, please help to analyz. Thanks!
Part Number: TM4C1299KCZAD Dear Champs,
As we check ULPI Interface Timing Diagram in datasheet, we saw below figure:
But it seems have some different with ULPI spec.
And it's also different with Microchip high speed PHY, USB3220C.
Why our ULPI…
Part Number: TM4C1299KCZAD Tool/software: Code Composer Studio Hi,
We have confirmed that TM4C1299 will connect cypress SRAM CY62158EV30(1024Kx8). The TM4C1299 still works on Host Bus 16-bit Muxed Interface mode and will connects two CY62158EV30 for 1 bank…
Part Number: TM4C1299KCZAD We would like to use EPI Host Bus 16 mode(ADMUX) to connect SRAM(1Mbx16). Is it possible to connect 8pcs SRAM at the same time?
From my understanding, all signals are connected together except CS(chip select) pin. Please help…
Other Parts Discussed in Thread: TM4C1299KCZADTM4C1299KCZAD TIVA C doesn't have hardware accelerators for cryptography support. Can I still use wolfssl in TM4C1299KCZAD TIVA C series ?
If yes Please let me know how the software based libs can be generated…
Our Tiva has 2 supply voltages: Vdd (and all other VRef & VDda) is 3.2V, Vbat (supply for hibernation) is set to 3.0V, both come from LDOs off of our system’s battery. Hibernation is triggered by our Tiva software, and when activated it also shuts down…
Hello Isis,
There is not a direct replacement for that device.
Looking at the peripheral set and Flash size, to get a device with 512kB Flash along with USB OTG and ENET MAC+PHY support, you'd need to look at devices such as TM4C1294KCPDT or TM4C1299KCZAD…
