Part Number: TMDS243EVM Other Parts Discussed in Thread: TMDS64EVM Tool/software: Hi, experts.
I have two TMDS243EVM and am running PCIe example code.
I connected the PCIe cable in the picture below to the PCIe connectors of the two boards
and downloaded…
Part Number: TMDS243EVM Other Parts Discussed in Thread: UNIFLASH Tool/software: Hi
When brushing and writing the binary initialization file, the error report is like this. At first, I suspected that there was a problem with the environment of my computer…
Part Number: TMDS243EVM Other Parts Discussed in Thread: TMDS64EVM Tool/software: Hi experts,
Is A no longer available for purchase? Is it simply out of stock? If it's difficult to get it right away, would the TMDS64EVM be okay?
TMDS243EVM Evaluation…
Part Number: TMDS243EVM Other Parts Discussed in Thread: SYSCONFIG Hello,
I am currently working on the TMDS243EVM and I am new to the TI MCU+ SDK environment.
My goal is to use the ICSSG module together with lwIP in a bare-metal (no-RTOS) configuration…
Part Number: TMDS243EVM Hello E2E Experts,
I'm using the HSE expansion interface pins to set the GPIO input mode, but the read level is always 0. I've connected it to the onboard 3.3V voltage pin, and the read level is still 0. The output high and low…
Part Number: TMDS243EVM Hello,
Is the full schematic for the TMDS243EVM evaluation board available?
I know the user manual contains some schematics for different subsystems, but can I have access to the full schematic ?
Best regards
Part Number: TMDS243EVM Other Parts Discussed in Thread: AM2434 I can power up my 243EVM. All LEDs except LD2 are lit. I do measure 0.85V at TP8, however.
When I run QuickStart demo, the tool loads the FLASH, and then while attempting to program the…
Part Number: TMDS243EVM Other Parts Discussed in Thread: AM2434 Hi experts,
My customer is currently inserting a PCIe board into TI’s development kit (TMDS243EVM) and trying to access the NTB on the PCIe board (for example, to read the Vendor ID and…
Part Number: TMDS243EVM Other Parts Discussed in Thread: AM2434 , SYSCONFIG , DP83869 Hi TI Community,
I am working on the AM243x EVM (AM2434, FCBGA ALV package) using MCU+ SDK 12.00.00.26 and CCS 20.5.0. I started from the official SDK example:
enet_lwip_icssg…
Part Number: TMDS243EVM The firmware of the two cores, R_0_0 and R_01, was previously written to the flash memory. We are using Lauterbach in "Attach" mode. I can debug the system. When I load an .elf or .out file in to RAM with data.load then set Program…
