Search tips
Showing 82 results View by: Thread Post Sort by

  • TMDS62LEVM: Workaround for tispl.bin Size Limitation (>2MB)

    Part Number: TMDS62LEVM Hi expert, The customer currently requires a custom tispl.bin of approximately 3.8MB. When booting from either SD Card Boot or UART Boot, only the tiboot3.bin log is printed and the boot process does not proceed to tispl.bin…
    • Answered

  • TMDS62LEVM: CCS debug fail with error

    Resolved
    Part Number: TMDS62LEVM Other Parts Discussed in Thread: AM62L Hi, I building the gpio_led_blink example, from FreeRTOS SDK for AM62Lx = 11.00.00.05, on a TMDS62LEVM with CCS 20.5.0.28. The EVM is powered and is booting linux from an SD card ok. …
    • Resolved
    • Answered

  • TMDS62LEVM: AM62L FreeRTOS SDK Getting Started Steps

    Resolved
    Part Number: TMDS62LEVM Other Parts Discussed in Thread: AM62L There is a missing step in the AM62L FreeRTOS SDK 11.00.00 getting started guide. There is no step to flash the example to EVM flash and boot from flash. Should be an extra step after…
    • Resolved

  • TMDS62LEVM: Flush KeyWriter Lite is failed

    Part Number: TMDS62LEVM I would like to test secure boot on AM62Lx. For confirming the process to flush key to eFUSE, I create keywriter lite binary built as key count and key revision are 0 with key_configurator. I referenced the following flush…

  • AM62L: Where to Buy TMDS62LEVM Evaluation Board?

    TI Thinks Resolved
    Part Number: AM62L Other Parts Discussed in Thread: TMDS62LEVM Hello Where can the TMDS62LEVM evaluation board be purchased from? The TI website just says 'Not available on TI.com' and I can't find it anywhere else. Thanks Mark
    • Answered

  • TMDS62LEVM: UART backup boot

    Resolved
    Part Number: TMDS62LEVM Tool/software: I would like to use UART boot as backup boot. When booting from UART backup boot, I transmitted tiboot3.bin with XMODEM. The transmission was succeeded but could not be polling to receive tispl.bin. It seems…
    • Resolved

  • TMDS62LEVM: (NO RTOS) eMMC reset using GPIO_EMMC_RSTn

    Part Number: TMDS62LEVM Tool/software: Hi, We want to know if there is a function in bare metal world that uses GPIO pin to reset eMMC In e2e.ti.com/.../sk-am62-gpio-control-for-reset-for-booting-device-of-qspi-and-emmc-card Ti mentions "they…
    • Answered

  • TMDS62LEVM: (NORTOS) How to disable cache

    Resolved
    Part Number: TMDS62LEVM Other Parts Discussed in Thread: SYSCONFIG Tool/software: Hi, For HW validation, we would like to disable cache to make sure all data are raw and direct data. However, if I comment out the cache_enable under this function…
    • Resolved
    • Answered

  • TMDS62LEVM: Questions regarding debugging session

    Resolved
    Part Number: TMDS62LEVM Other Parts Discussed in Thread: AM62L Tool/software: Hi, We finished setting up our own project, and played around with debugger a little bit. Here are some questions I would like to discuss: 1. How can we let the…
    • Resolved

  • TMDS62LEVM: How to use SOC_moduleGetClockFrequency()

    TI Thinks Resolved
    Part Number: TMDS62LEVM Other Parts Discussed in Thread: AM62L , SYSCONFIG Tool/software: Hi, Where can I find the list of module ID's and list of clocks? Seems not clickable like what Am62x does Thanks, Dazong

Didn't find what you are looking for? Post a new question.