Part Number: TMDSCNCD263P-SIP Other Parts Discussed in Thread: UNIFLASH Hello TI Team,
I recently purchased the TMDSCNCD263P-SIP evaluation board and am currently testing it. I am using the mcu_plus_sdk_am263px_11_01_00_19 SDK.
My goal is to flash…
Part Number: TMDSCNCD263P-SIP Other Parts Discussed in Thread: TMDSHSECDOCK-AM263 , , SYSCONFIG Dear Team,
We are using TMDSHSECDOCK-AM263 + TMDSCNCD263P-SIP for the intial HW setup of the project. In our project we need to use MCAN0, as per the documentation…
Part Number: TMDSCNCD263P-SIP Other Parts Discussed in Thread: UNIFLASH Regarding the EVK, I replaced the MCU S variant with the AM263P4-ZCZ F variant, which has 8 MB of internal memory (SIP)
I followed the F-variant floating-pin configuration and also…
Part Number: TMDSCNCD263P-SIP Other Parts Discussed in Thread: UNIFLASH , Hi Team,
I am facing an issue while trying to flash SBL using the UniFlash tool on the AM263Px device.(TMDSCNCD263P-SIP) (HS-FS)
Setup details:
Uniflash :Version: 9.4.1.5566…
Part Number: TMDSCNCD263P-SIP Other Parts Discussed in Thread: AM263P4 , , UNIFLASH Hi Team,
I am currently working on HSM bring-up and debug on AM263P4 and have a few questions regarding HSM debug access and runtime loading using Lauterbach TRACE32…
Part Number: TMDSCNCD263P-SIP Other Parts Discussed in Thread: SYSCONFIG Hi Team,
I am working on AM263Px with an OSPI NOR Flash device and trying to communicate in Octal DDR (8D-8D-8D) mode.
The controller is configured as follows:
- OSPI_setProtocol…
Part Number: TMDSCNCD263P-SIP Other Parts Discussed in Thread: UNIFLASH , AM263P4
Tool/software:
Hello Team,
we are currently working on AM263Px SIP board.
we were working on LIN Communication connection. we tried to execute the LIN example. But…
Part Number: AM263P4-Q1 Other Parts Discussed in Thread: UNIFLASH
Tool/software:
Hello Team,
We are trying flash SBL onto OSPI flash memory and it is stuck as below
*Same scripts are working on TMDSCNCD263P non SIP package.
Could you please…
Part Number: AM263P4-Q1 Other Parts Discussed in Thread: TMDSCNCD263P-SIP Hi Team
I need to verify the RDC internal reference voltage (1.8 V) .
Could you please let me know how this voltage can be measured or verified, either on the MCU side or on…
Hi Anusha,
Adding on to further references we do have TMDSCNCD263P-SIP , which is an EVM made for AM263P ZCZ_F package. The design files in https://www.ti.com/tool/TMDSCNCD263P-SIP#design-files show all the changes needed from TMDSCNCD263P for the ZCZ_F…
