Part Number: TMDSEVM437X Tool/software: Hi experts,
My customer is using the TMDS437EVM, but there is no video output to HDMI. They are using SDK v9.3.5.2. Q: They have removed the LCD and connected a DHMI cable, but are there any additional steps they…
Part Number: TMDSEVM437X Other Parts Discussed in Thread: TPS51200 Tool/software:
I am designing a DDR circuit using the EVM(TMDSEVM437X) circuit as a reference. The TPS51200's Rref (R41, R39) is 10kΩ, but based on the calculations in the datasheet…
Part Number: TMDSEVM437X Other Parts Discussed in Thread: AM6442 Tool/software: The evaluation board does not have an anti-reflection series resistor (22 to 50 Ω) on the AM437X_NAND_ADx line, but will this cause any problems with the waveform on the EVM…
Part Number: TMDSEVM437X Other Parts Discussed in Thread: SN74LVC1G07
Tool/software:
Is the input slew rate specification of the SN74LVC1G07 being met? I am designing my circuit based on a reference evaluation board. I have one concern regarding the…
Part Number: TMDSEVM437X Other Parts Discussed in Thread: TMDSIDK437X , TMDXSK437X
Tool/software:
Hi experts,
I can't boot MMC0 (SD Card) with TMDSEVM437X (rev: 1.4A). ・SDK: v09.03.05.02 ・tisdk-default-image-am437x-evm-09.03.05.02.wic.xz
The following…
Part Number: TMDSEVM437X
Tool/software:
The customer encountering compilation errors while trying to integrate TI StarterWare packages into a custom project to use the DCAN example. In the original example ( DCAN_LoopbackExample_evmAM437x_armTestProject…
Part Number: TMDSEVM437X Tool/software: Hi,
I am writing the SDK-based WIC image (tisdk-base-image-am437x-evm.wic.xz) to a USB memory stick and verifying USB boot on EVM. I used the TI recommended balenaEtcher tool. SYSBOOT is set to 10101b, but no…
Part Number: TMDSEVM437X Hi,
Operation has been confirmed using AM437x EVM (TMDSEVM437x). When I checked with the cat /proc/cpuinfo command on Linux, the BogoMIPS was 596.21, but is it correct to assume that it is running at 600MHz? If my understanding…
Part Number: TMDSEVM437X Hello All,
We found this helpful thread on TI forums:
https://e2e.ti.com/support/processors-group/processors/f/processors-forum/849130/am4372-am437x-boot-from-usb1-mass-storage
We have used the sysboot pin configuration…
Part Number: TMDSEVM437X Customer requires datasheet for the display used on TMDSEVM437X, manufacturer is OSD Displays, PN OSD070T1718-19TS.
Thank you, Brian