Search tips
Showing 202 results View by: Thread Post Sort by
    Answered

  • TMDX570LC43HDK: D9 and D10 pins on the TMDX570LC43HDK connector

    Resolved
    Part Number: TMDX570LC43HDK Hello, Please confirm that there is a bug in the spnu597a.pdf document. The below table describes that D9 and D10 pins related to ePWM1 are routed to the connector. But after checking TMDX570LC43HDK schematic it seems that…
    • Resolved

  • TMDX570LC43HDK: SCI PORT setup issue

    Part Number: TMDX570LC43HDK Other Parts Discussed in Thread: HALCOGEN I need to use all 4 SCI ports for my project. All the ports are working fine except SCI PORT 2. All the ports are configured in the same setting. I performed a quick test to confirm…

  • TMDX570LC43HDK: Error in Schematic and Layout on ETMDATA Pins ( EPWM1AB , N2HET2 , ETMTRACE EMIF Impacted )

    Part Number: TMDX570LC43HDK If you review the schematic on Pages 3 , and then on Pages 5, there is an error in many pins on Page 3 of the schematic. Many of the pins related to the ETMDATA are wrong, and not connected to the J10 header connector on…

  • RE: TMS570LC4357-EP: TMDX570LC43HDK

    Hi Spoorthi, Spoorthi M said: 1) Check the above reference and please provide the code for data communication between HDK board and e xternal hardware (data key) . The provided code can also be useful to get data from external hardware, did you try by disabling…

  • TMDX570LC43HDK: TMDX570LC43HDK-Defective 3 Nos

    Part Number: TMDX570LC43HDK Hi , I bought 4 nos of TMDX570LC43HDK and out of three are defective. 1.Heating of Ic and stopped working. 2.Unbale to flash the code 3.Board are not working.

  • RE: TMDX570LC43HDK: TMDX570LC43HDK

    After removing the following code from HL_sys_core.asm, does the LED blink using GHS IDE and compiler? .bss .org 0x08000000+0x00001000+0x00000100 __ghsend_stack::
    • Answered

  • TMDX570LC43HDK: Storing data on the SD card

    Resolved
    Part Number: TMDX570LC43HDK Are there any example code on how to read/write data to the SD card on this board, with or without a file system? (Obviously a file system will be better)
    • Resolved

  • RE: TMS570LC4357: Issues with Demo Project with my TMDX570LC43HDK

    Trivedi said: Does the eval board require two connections to make it work? Yes. USB cable is used for XDS100V2 emulator and virtual COM port (SCI1). Trivedi said: There is only one blue LED powered on while I plug the USB cable. Please plug in the power…
    • Answered

  • TMDX570LC43HDK: TMDX570LC43HDK - Sample project in Code Composer Studio

    Resolved
    Part Number: TMDX570LC43HDK Hi everyone, I'm trying to get started with a sample project in Code Composer Studio, using the eval board TMDX570LC43HDK. Unfortunately, I can't seem to get very far using the Project Wizard (Project -> Project Wizard (Resource…
    • Resolved

  • TMDX570LC43HDK: 3.3V Power Out Issue

    TI Thinks Resolved
    Part Number: TMDX570LC43HDK Hi Team, In the month of May 2022, we purchased TMDX570LC43HDK and executed an example experiment "UART communication 9600" whose output is seen on tera term. After that, when we tried to load the program, an error…

Didn't find what you are looking for? Post a new question.