Hi Board designers,
The below links are a quick reference to the collaterals that can be referred when starting a custom design.
Device Selection and features
Product Pages
https://www.ti.com/product/AM3351
https://www.ti.com/product/AM3352…
Brian,
Quick question; on the TI EVM (schematic attached) the WRMRST_N is not connected to the PMIC GPIO3. Should this be used rather than the 437x RESETIN_OUTn (as the TI EVM)...or both? 4024.AM437X_GP_EVM_3K0006_SCHEMATIC_REV1_5B.pdf
Part Number: TPS53313 Hi,
I have made 5V, 6A output current switch circuit using TPS53313. I have followed G3-PLC (CENELEC Band) Data Concentrator Reference Design page #47.
Now when I test using 1 ohm, 5w or 10w resistor it gives maximum 5V, 2A…
7178.AM437x_EVM_3k0006_Schematic_Rev1_4A.pdf
Hi,
Yes I am aware that AM437x needs HDMI transmitter IC for the HDMI interface.
I have referred the design of the EVM board where on the HDMI connector (J19) there's I2C signals (HDMICONN_I2CSCL, HDMICONN_I2CSDAL…
Part Number: AM4376
Hi,
Am437x_gp_evm_3k0006_schematic_rev1_4a.pdf
I referred the schematic design of AM4376 " Am437x_gp_evm_3k0006_schematic_rev1_4a.pdf " which has 20-pin ARM JTAG connections..TMDSEMU100V2U is 14 pin emulator...
Is it compatible…
Other Parts Discussed in Thread: AM4376 Hi,
I want to interface DDR3L from micron (part# MT41K512M8) with AM4376. I referred the EVM Schematic for AM4376 which I have attached with this post.
In the page no. 6, the termination resistors are used for…
Hello,
Can you try the attached images on your hardware for nand boot mode and let me know.
Note:- Rename MLO.txt to MLO and u-boot.img.txt to u-boot.img. Not sure if only this 2 images are required let me know if you need a different image type.…
