Part Number: TMS320DM8147 Tool/software: Hi
We are planning to use TMS320DM8147 into out upcoming DashCam project, which needs max 2K videos from two cameras. It shall interface with sensors, sd card, NAND, and external WiFi modules. So what are the…
Part Number: TMS320DM8147 hi,
the GPMC_D [0 to 15]/BTMODE[0 to 15] are used for boot config and as normal operational data bus.
can you suggest values for PU and PD resistors that configures the Boot and does not interfere the data bus during run…
Part Number: TMS320DM8147 Other Parts Discussed in Thread: TPS65911 , Hi,
I am using this processor in my design, while using the TPS65911 as power source to the TMS320DM8147
Is there a reference design ( that do not use the TPS65911 ) which supply…
Part Number: TMS320DM8147 Other Parts Discussed in Thread: AM5708 Hi, I am using TMS320DM8147 now in an active cooled design.
I am starting a new passive cooled design where I need H.264, Ethernet, video processing, etc. but MUCH LOWER POWER.
What…
Part Number: TMS320DM8147 Hi, I have made a design change where I no longer will use SPI2 on TMS320DM8147BCYE1.
P26, AD28, K22, J24, K23. Is there recommended termination or just leave no-connect (floating).
Is there still the Pin Mux Utility for…
Apologies for the late response. This thread fell through the cracks and didn't catch our attention.
Looking at this thread it is not clear if this issue is still open or already answered by other discussions.
In any case the thread doesn't have enough…
Part Number: TMS320DM8147 Hi~ I'm looking for Digital Media Processor to fit requirements below:
Max. image sensor input: 8M, 3264*2448, or above.
interface : Parallel, MIPI, LVDS, or HiSPi, 1Gbps(or above) per lane, 4 lanes at least
Dual image…
Part Number: TMS320DM8147 Is there a very fast bootloader available (in source code) that brings up a DM8147 as a PCIe slave and configures PCI Hardware IDs? The DM8147 is on a PCIe card designed to be plugged in to a host x86 PC. The TI published uboot…
