Other Parts Discussed in Thread: TMS320F28033 , UNIFLASH I am using TMS320F28033 Piccolo controller. I have stopped the GEL file related to sin and a plot of an array addressed at 0X008CC0. From that onwards iam unbable to connect the target. When i am…
Other Parts Discussed in Thread: UNIFLASH I am using TMS320F28033 Piccolo controller. I have stopped the GEL file related to sin and a plot of an array addressed at 0X008CC0. From that onwards iam unbable to connect the target. When i am trying to connecting…
Other Parts Discussed in Thread: TMS320F28033 Hey all,
I just got in a board I had manufactured and I'm having some issues initializing the device. I'm trying to use an XDS510USB JTAG device to program the microcontroller. I keep getting the following…
Dear Ryan,
I'm a new one of Piccolo motor control, Now I'm testing the eval.8301, it's ok.
I have some question about it.
1. If I need to use sense resistor 0.003 ohm, how do I modify the code? the phase current is <20A
2. In my schematic…
Other Parts Discussed in Thread: TMS320F28033 Hello,
I'm working on the TMS320F28033 and configured my CAN module as an eCan and running at 250kbps. During a bootload sequence (data received all 2ms - TP_DT_RX in the code below), I sometime have to…
CCS Team, (your input was already evident on some of this info)
Our customer is attempting to move from v3.3 to v11 and is experiencing a variety of build issues.
We have suggested an iterative approach - moving from v3.3 to v4, and so on.
But regardless…
Hi MSP student,
I'm attaching a list of devices supported by SYS/BIOS (the RTOS):
3276.devices.html
If you want TI-RTOS, which includes SYS/BIOS as well as driver support (SPI, UART, etc), the list of MSP devices supported by TI-RTOS is the following…
Part Number: SM73201-ARC-EV
Hello,
I am using RD-195 Arc Fault detection Development. My built configuration is TM320F28033 / 64 pins package. The only change in the code is in the linker file
where I added FLASHA and FLASHC_1 in the end.
.text…
Part Number: SM73201-ARC-EV Other Parts Discussed in Thread: SM73201 Hello I am using RD-195 for AFCI evaluation.
RD-195 has two data acquisitions SPI and Bitbanging. I am using SPI data acquisition mode.
So, as per my understanding it has c routine…
Hello Wilson
Usually, if PLL and controller works at lower current, it should not shows issue at a higher current. I feel it may be because of hardware limitations. You can still give a try to further tune the controller parameters. You can refer the…
