Search tips
Showing 207 results View by: Thread Post Sort by

  • RE: TMS320F28374S: Tms320f28374s startup abnormal

    The image quality of the scope screenshots is very poor. I have a hard time reading them. You say Ch4 is -XRS. I can see that the vertical scale is 1v/division, but it doesn’t appear the pin rises to 3.3v when inactive. It could be that you are using…

  • TMS320F28374S: Tms320f28374s startup abnormal problem analysis report

    Part Number: TMS320F28374S Dear Expert Problem description 1.Rf project 10 test debugging discovery part of the module dc control board DSP startup time is different, the individual module starts the charge of the power and then rereturns the electricity…

  • TMS320F28374S: About EPWM8A，EPWM8B set

    Part Number: TMS320F28374S 1，EPWM8A， EPWM8B，EPWM9A，EPWM9B，EPWM10A， Can the five ch BST be set to send waves with a difference of 72 degrees? 2，EPWM8A and EPWM8B, that is, BST1 and BST3, have a difference of 144 degrees. How to set?
    • Answered

  • TMS320F28374S: CCS10 output intelhex

    Resolved
    Part Number: TMS320F28374S Each address is 16 bits of data. But the data length in HEX is calculated according to 8 bits, can it be calculated according to 16 bits? That's weird, right?
    • Resolved

  • TMS320F28374S: BOOT: Firmware update via SCI

    Part Number: TMS320F28374S Other Parts Discussed in Thread: C2000WARE Hi. Is it possible to update firmware using SCIA pins only? For example, GPIO42 and GPIO43.

  • TMS320F28374S: CMPA and CMPB waveform complementary failure

    Part Number: TMS320F28374S When configuring three-level wave generation, CMPA and CMPB(complementary) configurations are used. It is found that the tube is always on (or off), there is an exception, and there is no corresponding complementary. Are there…
    • Answered

  • RE: TMS320F28374S: How creat CRC in the end of Hex or Bin?

    Resolved
    Hi Carl, Do you have further questions on this? Or can I close this thread? Thanks and regards, Vamsi
    • Answered

  • TMS320F28374S: Run from internal Flash

    Resolved
    Part Number: TMS320F28374S Other Parts Discussed in Thread: SYSCONFIG , C2000WARE I have a working CCS project that works great when flashed in RAM. But when I flash to FLASH, nothing happens after the device is restarted (power off-on). What's wrong?…
    • Resolved

  • TMS320F28374S: Flash API Error: Incorrect Data Buffer Length

    Part Number: TMS320F28374S Other Parts Discussed in Thread: C2000WARE Hi. I used Application Note https://www.ti.com/lit/sprabv4 for SCI Boot. Flash Kernel took from ~\C2000Ware_4_00_00_00\device_support\f2837xs\examples\cpu1\F2837xS_sci_flash_kernel\cpu01…
    • Answered

  • TMS320F28374S: How to protect DCSM from leaks when programming the chip for the first time?

    Resolved
    Part Number: TMS320F28374S Using DCSM function of 28374S. All functions are normal. But consider the factory's first programming chip problem: it was discovered that the generated HEX and bin files and.out contained secret keys. So it's not safe to…
    • Resolved

Didn't find what you are looking for? Post a new question.